Picture of Curt Hitch # C72ZV Installed on 2025 Toyota Crown

Question

Question:

Any chance you have photo of this installed on 2025 Crown? The Toyota mount looks aftermarket. Id prefer a more integrated appearance.

asked by: Duane B

0

Expert Reply:

Hey Duane, I attached a couple pictures of the Curt Hitch part # C77ZV installed on a 2025 Toyota Crown for you to check out. Due to design of vehicle I don't think you'll find a more integrated style of hitch for your vehicle but let me know what you think of this one.

expert reply by: Jameson C

0

Curt Hitch Installed Toyota Crown
(click to enlarge)

Duane B.

2/7/2025

Jameson, thanks for the quick reply. This appears to be the Crown, not the Crown Signia. Would the same receiver apply to both models (the rear end appears to be different)?

Jameson C.

2/9/2025

@DuaneB I was confused and I apologize. The Signia is a separate model from the Crown and when I read that Curt said their hitch fits all models of the Crown I assumed it meant the Signia too. I hope we get a fit for the Signia soon.

Duane B.

2/10/2025

@JamesonC no worries. Thanks for researching it.

Jameson C.

2/10/2025

@DuaneB No prob! I would assume that we will get a fit at some point so I would periodically check back and once something it out we'll have it on our site.

Answer 1

Hey D! We're usually ahead on the fitment but it looks like we missed this one. The Curt Trailer Hitch Receiver #C77ZV will fit your 2026 Toyota Crown Limited. I'll get that updated on our site as well. What will you be using the hitch for?

view full answer...

Answer 2

Hey Todd, welcome back! The Curt Trailer Hitch Receiver #C77ZV will fit your 2025 Toyota Crown Limited. Then for wiring to power your lights you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C54RJ. If you…

view full answer...

Answer 3

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 4

The Thule T2 Classic #TH9045 will fit 1-1/4 inch, Class I and Class II trailer hitch receivers. There isn't an adapter specifically designed to make it fit into 2 inch receiver hitches however you can use a universal adapter sleeve #HT02.

view full answer...

Answer 5

Hello, and thanks for getting in touch. The Curt Class 3 Hitch #C77ZV is what I recommend for your 2023 Toyota Crown Limited. The hitch itself will not interfere with the safety systems and it will not invalidate any warranty. With a bike rack…

view full answer...

Answer 6

Hey Damon, the big difference between the EcoHitch #EH27CR and the Curt #C77ZV is the cost and the towing capacity. The EcoHitch costs more and has a higher towing capacity but is basically the exact same in terms of being hidden. So if it were me I…

view full answer...

Answer 7

Hey David, I was able to confirm that the Curt hitch part #C77ZV is a fit for your 2025 Toyota Crown Platinum Hybrid as it is a fit for all models of the '25 Crown.

view full answer...

Answer 8

Hi Douglas! The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C67FR we have listed is the exact same thing as the 11575. We just changed the part number as said part number is very similar to the Attwood Boat Mooring Fender Lock…

view full answer...

Answer 9

Hey Joseph! That is a 3,500 lb Lippert axle so you can use the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle #BK2-100. If you prefer a Timken kit made in the USA the #TMK52VR is also available. Both come with…

view full answer...

Answer 10

Hey Michael. I do not have a wiring diagram for a 2026 Crown Signia so I can not identify those wires. Your SUV does indeed have PWM system for the LED lights. To install the Curt Powered Tail Light Converter item #C59236, you'll need to use a…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Picture of Curt Hitch # C72ZV Installed on 2025 Toyota Crown

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching