Will the Performance Tool Funnel Spout PT97PJ Attach to a 2.5 Gallon Def Jug?

Question

Question:

Can you please tell me if this spout will fit a 2.5 gallon AC Delco Def jug?

asked by: Eric S

0

Expert Reply:

Yes, it will Eric! The Performance Tool Funnel Spout item # PT97PJ will definitely work with the 2.5 gallon AC Delco Def jugs.

What kind of truck do you have?

expert reply by: Jerred H

0

Jerred H.

10/30/2025

Hey Eric, how did the Performance Tool funnel spout work with your 2.5-gallon AC Delco DEF jug? Your feedback could help others looking for the same fit.

Answer 1

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hi Eric, Thanks for your question. As long as you are able to remove the factory hitch from your 2025 GMC Sierra 2500, the #C96CR will work as a replacement. Of note, the #C96CR will more than likely mount up a bit differently than your factory…

view full answer...

Answer 6

Hi Dennis! The Hellwig Load Pro 35 Heavy Duty Helper Springs with Custom Mounting Kit - Above Axle #HE93XR can potentially raise an unloaded truck a little, but it's going to be very minimal and will really only happen if your suspension is…

view full answer...

Answer 7

Hey Aaron, thanks for reaching out. Based on the specs I found online, the Americana Modular Wheel #AM92NR shares the same dimensions as your SRW 31767A9 trailer wheel. It has the same 17.5" x 6.75" size with 8 on 6.5" bolt pattern and…

view full answer...

Answer 8

Hey Matt, while we haven't had the chance to get a picture of the Curt hitch part #C96CR installed we have had chance with the 2 inch version of the hitch part #C35CR which I attached below. It's on a truck with a service body though so that…

view full answer...

Answer 9

Hey Carter, thanks for reaching out! The GM trucks with the 6-1/2' bed can use a stationary hitch as long as the 5th wheel trailer has a tapered nose. For your 2025 GMC Sierra 2500 I recommend using the PullRite OEX SuperLite #PUL96ZR for a few…

view full answer...

Answer 10

Hey Tim, that's a hard question to give an exact answer on as the Furrion fridge part #FR92TF wouldn't run all the time but it does run more when it is hotter. So it draws around 11 amps when running but it will kick off and on so it's…

view full answer...

Answer 11

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 12

Hey Matt! The Hellwig Load Pro 35 Heavy Duty Helper Springs #HE93XR are only designed to give you additional support while towing/hauling. Aftermarket suspension enhancement cannot increase the capacity of your 2024 Silverado 2500. The only way to…

view full answer...

Will the Performance Tool Funnel Spout PT97PJ Attach to a 2.5 Gallon Def Jug?

Product Page this Question was Asked From

Continue Researching