Replacing Factory Hitch 2025 GMC Sierra 2500HD
Updated 07/20/2026 | Published 07/09/2026
Question:
I am replacing the factory hitch on my 2025 GMC Sierra 2500HD. Will this work ok and can i use the factory wiring. Thank you
asked by: Eric L
Expert Reply:
Hi Eric,
Thanks for your question.
As long as you are able to remove the factory hitch from your 2025 GMC Sierra 2500, the # C96CR will work as a replacement. Of note, the # C96CR will more than likely mount up a bit differently than your factory hitch. The receiver opening on aftermarket hitches can also end up sitting lower than the opening on the factory hitch because of how they install to the frame.
The # C96CR is rated for up to 20,000 lbs of gross trailer weight and 2,700 lbs of tongue weight, but you'll still want to stay within the towing and tongue weight ratings specified by GMC for your particular truck.
You also shouldn't have any issues reusing your factory trailer wiring and connector with this hitch.
Out of curiosity, what will you be towing with your new hitch?
Eric
7/20/2026
Thanks for the response. Yes it will bolt up directly but take note, the bumper will not bolt back on because the bumper bolts to the factory hitch.
Christopher H.
7/20/2026
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- Trailer Hitch
- For Towing
- Class V
- 2700 lbs TW
- 20000 lbs GTW
- 20000 lbs WD GTW
- 2-1/2 Inch Hitch
- 2700 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Looking for Picture of Curt Hitch C96CR Installed
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- Shop: B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Q&A: Highest Capacity Bumper Hitch for a 2024 Chevy Silverado 2500
- Q&A: Replacement Hitch for 2020-2021 Chevrolet/GMC Silverado/Sierra 2500/3500HD.
- Q&A: Will Curt Trailer Hitch Fit If I Remove the OEM Hitch Off of My 2020 Chevy Silverado 3500
- Q&A: What Causes Oblong Hitch Pin Hole On Equal-i-zer WDH
- Shop: TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2"
- Video: TorkLift SuperHitch Magnum Trailer Hitch Receiver Review
- Search Results: hitch pin
- Search Results: 25 inch shank
- Video: Checking Out the Gen-Y Hitch Pin and Clip for 2-1/2" and 3" Hitches
- Video: B&W Anti-Rattle Clamp Review - Quieter, Smoother Towing
- Shop: JR Products Quick Disconnect Dust Plug
- Shop: etrailer Trailer Hitch Pin and Clip for 2" & 2-1/2" Hitches - 3" Span - Black Nickel
- Q&A: How to Prevent Hitch Pin Hole Deformity
- Q&A: Can Grade 8 Bolts on an Adjustable Trailer Coupler Be Replaced with Hitch Pins
- Shop: Gen-Y Hitch Pin and Clip for 2-1/2" and 3" Hitches - 5/8" Diameter x 4" Span
- Shop: B&W Tow & Stow 3-Ball Mount - 2-1/2" Hitch - 8-1/2" Drop, 9" Rise - 18K
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
on Trailer Hitch
Eric L.
7/13/2026
I am towing an imagine 2400. The hitch i have has a 2.5 inch shank already setup for a class 5 receiver. The factory hitch was damaged, reason for replacement. How much lower does the Curt sit??