Looking For New Disc Brake Kit For 2020 Continental Boat Trailer
Updated 10/31/2025 | Published 02/02/2025
Products Featured in This Question
Question:
I have a 2020 Continental boat trailer A2450B-5000 and the dual axel disc brakes are literally falling off. I need to know which kit will bolt right on. Thanks
asked by: Ryan W
Expert Reply:
Hey Ryan, thanks for reaching out. We certainly should have a disc brake kit that will work for you, but there is no way to know exactly what kit you will need based on the make and model of trailer. Trailer manufacturers just do not make this kind of info available online.
Specifically, I will need to know your axle weight capacity, and your inner/outer bearing sizes. This way we can be sure you get the right brake assembly, and correct hubs for your trailer.
For example, what we see most commonly are the 3,500 lb axles which use the # L68149 (1.378" inner diameter) inner bearing and the # L44649 (1.063" inner diameter) outer bearing. The hubs use the standard 5 on 4-1/2" bolt pattern. If this is what you have, the DeeMaxx Disc Brake Kit # DE66YR is what I recommend.
If you want to reply below and confirm your axle capacity and bearing sizing I will get back to you.
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 3500 lbs Axle
- 14 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Continue Researching
- Search Results: trailer brakes
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Video: DeeMaxx Disc Brake Kit Review and Installation
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coat/Stainless - 3,500 lbs
- Q&A: What Is Included With The DeeMaxx Disc Brake Kit DE42FR?
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet/KodaGuard - 3,500 lbs - E-Z Lube
- Q&A: How to Determine What Brakes I Need for my Trailer?
- Video: DeeMaxx Disc Brake Kit Spec Review
- Shop: Replacement DeeMaxx Disc Brake Caliper - Stainless Steel - 3,500 lbs to 6,000 lbs
- Q&A: How to Select Replacement Hub/Drums & Brakes for Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Recommended Mounting Hardware for 10" Disc Brakes
- Video: Let’s Check Out the Mounting Bolts and Hardware for 10" Brake Assemblies
- Video: The Low-Down on the Mounting Bolts and Hardware for 10" Brake Assemblies
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Q&A: Disc Brake Kit Recommendation for 3,500 lb Axle and 5 on 4-1/2" Bolt Pattern Idler Hub
- Q&A: Torque Figure for Mounting Calipers and Mounting Bracket for Hydrastar Disc Brake Kit 7k Axles
- Q&A: Torque Spec for Tightening Trailer Brake Assemblies to Trailer Spindle
- Article: How to Bleed Your Trailer Surge Brakes
Jesse M.
10/30/2025
Hey Ryan, were you able to confirm your axle capacity and bearing sizes for the Continental trailer? Once you have those details, I can help make sure the right DeeMaxx disc brake kit bolts up correctly. Let me know what you find so we can get you set up with the right fit.