How to Determine Correct Torque Setting for New Disc Brake Setup on Boat Trailer
Updated 05/22/2020 | Published 05/20/2020
Question:
Just purchased new all in one brake hub and rotors, along with new bearings, and all hardware. Im unsure of what to torque these to once replacing them. Its a 3-axle 12,000 lb boat trailer. any insight? Thank you for your help.
asked by: RALPH D
Expert Reply:
What you'll want to do is refer to your instructions for the proper torque specs. For example, the instructions for the 5.2K - 6K Kodiak Disc Brake Kit # K2HR526D call for the brake mounting flange to be welded to the spindle and then the caliper guide bolts to be torqued to 40-50 ft-lbs. I wasn't able to find what exact brake kit you have so you'll want to make sure you follow your instructions.
When it comes to the wheel bolts that has a few different factors in it as well. I am attaching a sheet that shows how to determine the correct torque for you to check out.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5,200 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 5200 lbs
- 6000 lbs
- Brake Assembly
- 6 on 5-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: deemaxx hydraulic brake line ~ rubber ~ 3/16" brass male inverted flar
- Q&A: Trailer Wheel Torque Spec Chart
- Search Results: reverse solenoid
- Search Results: breakaway
- Search Results: tire carrier
- Search Results: guides boat trailer parts
- Search Results: trailer lights
- Search Results: bumpers
- Shop: DeeMaxx Disc Brake Kit w/ Actuator for Triple Axle Trailers - 12" Hub/Rotor - 6 on 5-1/2 - 6K
- Shop: DeeMaxx Disc Brake Kit - 12" Hub/Rotor - 6 on 5-1/2 - Maxx Coating - 6,000 lbs
- Shop: DeeMaxx Hydraulic Brake Line Kit - Triple Axle - 20'
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Female and Male Inverted Flare - 18"
- Shop: Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Silver Mod Wheel - 6 on 5-1/2
- Q&A: What Direction Should Disc Brake Calipers Face
- Video: HydraStar Vented Marine Electric Over Hydraulic Actuator Installation - 2019 Grand Design Momentum 5
- Video: Hydrastar Brake Actuator - Electric-Hydraulic Brake Actuator - HS381-8067 Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Parts Needed To Switch From Surge Brakes To An Electric-Over-Hydraulic Actuator
- Video: Replacement Adapter Port for DeeMaxx Disc Brake Calipers Review
- Q&A: Determining Parts Needed To Add Electric Over Hydraulic Disc Brakes To Triple Axle Boat Trailer
- Video: A Closer Look at the Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes
- Q&A: What Actuator is Needed for Hydraulic Disc Brakes with 1,500 psi Rating Requirement
- Q&A: Comparing Maxx and Stainless Steel DeeMaxx Disc Brake Kits
- Video: Let’s Check Out the Spare Tire Carrier
- Video: An In-Depth Look at the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System
- Video: A Closer Look at the etrailer Anti-Rattle Hitch Collar on a 2023 Fleetwood Discovery LXE Motorhome
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How To Measure And Replace Everything In Your Hub Assembly
on Accessories and Parts
