What Equal-i-zer Shank is Closest to Curt 17132 Shank Size?
Updated 11/03/2025 | Published 01/26/2025 >
Products Featured in This Question
Question:
Is there anything between the Equal-I-zer EQ34FR and the Equal-I-zer EQ94FR? And is the hitch a true 2.5”? I recently purchased the Curt 17132 and the height is perfect but the quality control is horrible. The hitch is 2.46” wide so there’s a lot more slop than if they were to make it to spec.
asked by: Aaron
Expert Reply:
Hey Aaron, thanks for reaching out!
The Equal-i-zer Weight Distribution Shank # EQ94FR will be your best bet since it has a 9" drop compared to the 9-1/4" drop from your Curt Shank # C17132.
If you can let me know what exact amount of drop you're needing I can check and see if we have any that are closer to what you're needing.
The slop you're seeing is normal for all things towing. Hitch receiver and ball mount manufacturers know that there are tolerances on both sides of the equation so both ends are a "true" 2-1/2". If it were then it would be really hard to get the ball mount/weight distribution shank to fit because of the powder coat paint on everything.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 9 Inch Drop
- Square - 12 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Q&A: Do You Have an Updated Diagram for the BulletProof Hitches Weight Distribution Shank BPH75RR?
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Q&A: Weight Distribution Shank For 2-1/2 Inch Hitch Receiver
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 16" Long - 10" Rise, 6" Drop
- Shop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop
- Shop: BulletProof Hitches Weight Distribution Shank for 2-1/2" Hitches - 8" Long - 9 Hole Adjust
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 8" Rise, 4" Drop - 400 lbs TW
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Q&A: Can Shank for Weight Distribution Hitch be Modified
- Q&A: Could Unused Lower Section of Weight Distribution Shank be Cut off
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: 5 Things to Know About Weight Distribution Hitches
- Search Results: trailer jack
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Brake Controller
- Video: Feature Review - Big Truck Big RV Trailer Jack Foot Scale with Tongue Weight Gauge
- Shop: Fifth Wheel Hitch


Jon G.
11/3/2025
Hey Aaron, did you end up finding a shank that matched the drop you needed for your setup? Once you dialed in the right height, did the fit feel more solid than with the Curt shank? Your update could make it easier for the next person comparing these options.