Wiring Harness Options For 2019 Chevy Equinox LT 1.5 AWD

Question

Question:

I have a 2019 chevy equinox lt 1.5 awd. Question .. Is there a T type wiring harness that works strictly off of the power for the rear lights instead of having to run a power wire to the battery.. If so which one..are there any cons to this type of harness.. Also is there any etrailer dealers in ny that can do the installation .. Thanks Kev

asked by: Kev

0

Expert Reply:

Hello Kev, thanks for reaching out. We do have wiring harness options for your 2019 Chevy Equinox. If you already have the factory tow package, you can use a plug and play harness like the Tekonsha # 118285. This plugs into the OEM tow connector and does not require running a wire to the battery, since that connection would already be present.

If you do not have the tow package, you will need to use the Tekonsha # 118750 instead. This plugs in behind the tail lights and does require running a wire to the battery. The converter module must have its own dedicated power source, and this can only be done by going straight to the battery. There is no way around this if you don't have the factory tow package.

We should have some good installers in your area. The link below will show you our installer locator. Just enter your zip code and you will see the full list of installers in your area. Feel free to reach out if there is anything else I can do.

expert reply by: Jesse M

0

Kev

10/18/2024

No factory tow package Thanks very much

Reply

Answer 1

Hey Kienan thanks for the picture. The only custom fit plug in wiring harness we have for a 2026 Chevy Equinox Activ, is the T-One Vehicle Wiring Harness item #118285. This replaces the one that came with the factory tow package and has a connector…

view full answer...

Answer 2

Hey Bill, so the hitch ( #C98CR ) you mention will fit a 2025 Equinox, but right now there are no custom fit wiring harnesses. So, your only option on that front would be to use a universal harness like the Curt Powered Tail Light Converter with…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hello Andrew. It looks like our installers have not had the privilege of doing an install on a 2025 Chevy Equinox. I see that the wiring harnesses that we do have in stock have the 6 pin connector. It looks like Curt is aware of this issue and is in…

view full answer...

Answer 5

Since your 2024 GMC Terrain doesn't have the factory tow package the only way to install trailer wiring will be with a universal style kit like the Curt #C59236 which does require splicing into the taillight harness of the vehicle. There…

view full answer...

Answer 6

The part #3034-P brake controller adapter plugs into the connector beneath your vehicle's dashboard. To reach the connector, first locate the notch in the access panel in the center of the dash, near the passenger side. Using a trim panel puller,…

view full answer...

Answer 7

In order to determine if a 2020 GMC Terrain has the factory tow package you will need to take a look in the rear fuse box on the driver side of the vehicle. In the fuse box there will be two locations you need to check, K2 and K3 which are for the…

view full answer...

Wiring Harness Options For 2019 Chevy Equinox LT 1.5 AWD

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching