Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Gary, the etrailer hitch part #e44AR that fits your 2022 Honda Passport does have a matte black powdercoat finish which is very durable. It's on the inside and out so it will do a great job overall protecting the hitch. Then for trailer…
view full answer...The blinkers and brakes should be on the same wire. 4-way systems put the right blinker and stop on one wire and the left blinker and stop on another wire. Then the remaining two wires are running lights and ground. I've attached an article to…
view full answer...I haven't heard of the Curt 7-way tester not working with OEM brake controllers. There was a Tekonsha tester that had problems with Dodge and GM trucks so it is possible. We have been able to confirm that the Pollak 7-Way to RV Socket LED Circuit…
view full answer...New GM trucks don't have consistent 12 volts on their trailer wiring circuits. While this tends to not be a problem for trailer lighting it does not always work great with more sophisticated circuits like your tester. This is a big issue for…
view full answer...It sure does, yes; I verified directly with the manufacturer that the Curt hitch does fit your 2023 Ford Maverick. The correct part number for your truck is the following: - Curt Trailer Hitch Receiver #C84BR The #C84BR is a complete bolt-on…
view full answer...When running the power wire for the Tekonsha wiring harness part #TK53VR you would need to run it to the battery in your rear seat like you mentioned. There isn't anything different that would need to happen.
view full answer...Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…
view full answer...The Yakima LockNLoad Platform part #Y05045, #Y53TR, #Y05042-2, and #Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity…
view full answer...Here are the parts you'll need for a 2021-2023 Toyota Highlander Thule Roof Rack: Naked Roof - 60" WingBar Evo Crossbars #TH711520 - Eco Clamp Feet #TH710501 - Fit Kit #TH98ZE Flush Mount Rails - WingBar Edge Crossbars #TH69FE - Edge…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Generally the 7,000 lb Lippert axles are going to use standard sizing. With the brakes being the 12" x 2" with a 5 bolt backing plate, and the hubs being an 8 lug, and using the standard 1.25" Outer and 1.75" Inner bearing. While…
view full answer...Since the Draw-Tite (hidden hitch) #76025 crossbar on your 2014 Honda Odyssey is not accessible you can either mount the bracket directly to the fascia or use another style bracket. I recommend using the Curt Easy Mount Bracket for 4- or 5-Way Flat…
view full answer...Related Searches
Filter Your Search
Contact and Help