Replacement Lock Cylinder for BOLT Locks on a 2018 Ford F-350 w/ a A.R.E DCU Topper

Question

Question:

Hi, I just purchased a pre owned ARE DCU topper with no keys, I read they use BOLT cylinders, I am in need of 3. My truck is a 2018 F350. Would be great to use the trucks key on the topper, thanks!

asked by: Carlos A

0

Expert Reply:

Congrats on your new purchase! Since your A.R.E DCU topper has the BOLT cylinders you'll want to use the Replacement Lock Cylinder item # BLT79FR. This cylinder will work with your 2018 F-350's key.

To secure the cylinders in place you will also need to order three of the Retaining Nut item # BL4306752.

expert reply by: Jerred H

0

Answer 1

Hey Diego, The Replacement Lock Cylinder for BOLT Toolbox Latch #BL7025636 is only the cylinder and is designed for you to reuse your old hardware. If you're needing to replace the retaining nut as well then that's available as part…

view full answer...

Answer 2

Hello David, thanks for reaching out. I will need more information on your camper shell in order to know what locks will work. Can you provide the model number from your shell? That will help a lot to narrow things down. For example, if your ARE…

view full answer...

Answer 3

Hello Tyler, thanks for reaching out. We may have what you need, but I will need more information in order to know what locks will work. Does your ARE cap use the Bolt brand locks that key to your ignition key? If so, the Replacement Lock Cylinder…

view full answer...

Answer 4

Thanks for reaching out, Hal! That's a really good question. Based off what I could find, if the old cylinder worked with your ignition key you would want to get part #BL692918. I included the ignition key compatibility diagram below for you. You…

view full answer...

Answer 5

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes. If not you will need item #BL7022698.

view full answer...

Answer 6

Unfortunately The Replacement Lock Cylinder for BOLT Toolbox Latch #BL692917 is not confirmed to fit your 2020 Ford F-350 Super Duty. You will need The Replacement Lock Cylinder for BOLT Toolbox Latch #BL7025636. This lock will work with your side…

view full answer...

Answer 7

If you have a BOLT tool box yes, the part #BL692917 is a confirmed fit.

view full answer...

Answer 8

Yes, you can Bill! The Firestone Air Command Standard Duty Air Compressor item #F39VV is indeed compatible with Pacbrake air bags. They use the same size fittings. Both the Pacbrake Alpha HD Pro Air Bag Suspension Kit w/ Internal Jounce Bumpers item…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Thanks for the pictures Mike! The Trailer Mate Hitch item #TMT59FR will indeed fit your 2020 Ford F-150 without a factory hitch. The hole in the bumper and the two holes in the brackets will not be used in the installation though. The hitch attaches…

view full answer...

Replacement Lock Cylinder for BOLT Locks on a 2018 Ford F-350 w/ a A.R.E DCU Topper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching