Replacement Retaining Nut for BOLT Replacement Toolbox Lock Cylinder

Question

Question:

Hello, good morning, I am trying to see if a certain lock comes with the lock nut. Thanks

asked by: Diego G

0

Expert Reply:

Hey Diego,

The Replacement Lock Cylinder for BOLT Toolbox Latch # BL7025636 is only the cylinder and is designed for you to reuse your old hardware. If you're needing to replace the retaining nut as well then that's available as part # BL4306752 on our site.

Let me know if you're talking abut a different lock cylinder and I'll be more than happy to look further into this for you!

expert reply by: Jon G

0

Jameson C.

12/22/2025

Hey Diego, did the replacement lock cylinder and retaining nut work out for your toolbox latch? Knowing how that combo fit together could help others replacing the same parts.

Answer 1

Hello Tyler, thanks for reaching out. We may have what you need, but I will need more information in order to know what locks will work. Does your ARE cap use the Bolt brand locks that key to your ignition key? If so, the Replacement Lock Cylinder…

view full answer...

Answer 2

Hello David, thanks for reaching out. I will need more information on your camper shell in order to know what locks will work. Can you provide the model number from your shell? That will help a lot to narrow things down. For example, if your ARE…

view full answer...

Answer 3

Congrats on your new purchase! Since your A.R.E DCU topper has the BOLT cylinders you'll want to use the Replacement Lock Cylinder item #BLT79FR. This cylinder will work with your 2018 F-350's key. To secure the cylinders in place you will…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 7

Hey Don, thanks for the information! That's a significant amount of sag and a pretty heavy trailer, I recommend the Hellwig Pro Series Helper Springs item #HE79FR for the higher 2,500 lbs capacity. I doubt you're driving around with your bed…

view full answer...

Answer 8

Unfortunately you can not Doug. The factory hitch on your 2020 Ford F-150 Lariat is part of the rear step-bumper assembly. It's bolted to your frame and then the step-bumper bolts to the trailer hitch. Removing the factory hitch removes the…

view full answer...

Answer 9

Hey Wayne! The answer to your question is maybe. As you know, the Curt #C14017 is designed for the F-150 without the factory hitch. Typically this is because the factory hitch is integrated with the bumper and removing it to replace it with the…

view full answer...

Replacement Retaining Nut for BOLT Replacement Toolbox Lock Cylinder

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching