bing tracking image
Customer Service My Orders
Q & A Icon

Can The Demco Channel Tongue Trailer Coupler DM15945 Be Installed On Aluminum Tongue?  

Updated 05/30/2025 | Published 10/11/2024

Question:

I am preparing to install my new Demco easy latch coupler onto my aluminum trailer. Do I need to worry about galvanic corrosion? What would you put, if anything between the plated steel coupler and the aluminum surface being attached to? Thanks. John

0

Expert Reply:

Good question, john. The Demco Channel Tongue Trailer Coupler # DM15945 is fine to use on an aluminum tongue. The zinc coating on these are not going to have any reaction with the aluminum frame. You do not add any additional material between the coupler and the tongue. Just make sure not to over-tighten the coupler bolts. If you go too tight it could cause the aluminum to bend.

expert reply by:
0
Jesse M
Howard profile picture

Howard

5/30/2025

What size mounting bolts does this coupler require.?

Reply
Jesse M. profile picture
Etrailer Expert

Jesse M.

5/30/2025

@Howard 1/2" grade 5 bolts is what you will want for the Demco coupler.
Reply
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>