Parts Needed to Add 7-Way Wiring and Brake Controller to 2013 Lincoln Navigator
Updated 12/22/2025 | Published 10/10/2024 >
Products Featured in This Question
Question:
2013 Lincoln Navigator has 4 prong light connector want to add 7 prong plug with brake controller for a 5000 pound car trailer what do I need to buy any good video tutorials thanks
asked by: Allan V
Expert Reply:
Hello Allan; to add a 7-way you need the Universal Installation Kit for Trailer Brake Controller # ETBC7. This kit comes with the adapter, wiring, and everything else required to upgrade your existing 4-way to a 7-way. The # C55774 you were looking at is designed to fit if you have the factory 7-way with a US Car connector.
For the brake controller I recommend the Redarc Tow-Pro Liberty # RED24FR. This brake controller is reliable and easy to use. The main unit installs behind the dash with only the control knob visible, giving it a factory look.
If you have the factory tow port under the dash you can use the Redarc Plug-and-Play Wiring Harness # 331-TPH-005 for installation. However, you will have to find a way to tie in the brake output wire from the 7-way to the factory wiring for this to work. If you do not have the port, or don't want to mess with the factory wiring, you will need the Universal Wiring Harness # RED69FR.
We don't have any installation videos on a Lincoln Navigator for these parts so I attached some from other vehicles so you can see what the process is like.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- Factory Tow Package
- 4 Flat
- 7 Blade
- Plug and Lead
- Plug-In
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Gooseneck Hitch for 2026 Ram 3500 Big Horn Short Bed
- Q&A: Wiring Needed To Tow a Trailer With Brakes With a 2025 Ford Ranger no Tow Package
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Best Rear Suspension Enhancement For 2020 Ram 2500 4WD With In-Bed Gooseneck Hitch
- Q&A: 2025 Kia Sportage PHEV
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: How To Tell If a Ford Transit Has the Tow Package and Parts Needed To Add It
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Holiday 2025 | RVers’ Favorite Gear & Road Picks





Robin H.
12/22/2025
Hey Allan, how did the upgrade to the 7-way plug and Redarc brake controller go on your Navigator? Your update could make it easier for others adding a brake controller to a 4-way setup.