Is 4769-28 The Correct Replacement Spring for a Fulton T1802 Hand Winch

Question

Question:

Will this 4769-28 spring work on a Fulton T 1802 Boat Trailer Winch? Please?

asked by: John E

1

Helpful Expert Reply:

I checked with my contact at Fulton who confirms that the # 4769-28 replacement spring is indeed a fit for your Fulton T1802 hand winch. I've provided an exploded drawing showing how the spring sits on the winch.

expert reply by: Mike L

1

click to enlarge

Answer 1

I spoke to my contact at Fulton and he said the correct replacement spring for the ratchet of your Fulton F2 winch is the part #4769-28. I attached a picture that shows a diagram for the winch for you to check out. You will be able to see how the…

view full answer...

Answer 2

The Fulton F2 Fully Enclosed Trailer Winch with Strap and Adjustable Handle - 1,600 lbs #FW16000101 will not need to be completely taken apart to replace the spring, but the housing, the pin and ratchet pawl will need to be removed to replace the…

view full answer...

Answer 3

The Replacement Spring #4769-28 that you referenced will install onto the pawl assembly of your winch. Check out the pictures I attached that show an exploded diagram to see how it installs.

view full answer...

Answer 4

The Replacement Spring #4769-28 that you referenced will install onto the pawl assembly of your winch. Check out the pictures I attached that show an exploded diagram to see how it installs.

view full answer...

Answer 5

The video is correct for Fulton F2 winch, #FW32000101 has a neutral, freewheel position for quick line payout without the handle spinning. I have attached an additional video that shows this feature.

view full answer...

Answer 6

I have attached the instructions sheet for the Fulton hand winches that shows how to replace the ratchet spring. I have also attached a link to one of our other expert questions that includes a video showing how to disassemble and reassemble the…

view full answer...

Answer 7

Hey Earl, The #F86ZR is designed for 2-speed Fulton winches so you would need the 7302027 or 4769-28 single speed spring for your Fulton Single Speed Winch #FT16020301. It looks like we not longer offer this spring so you'll want to reach out to…

view full answer...

Answer 8

I spoke to my contact at Fulton and he said the correct replacement spring for the ratchet of your Fulton F2 winch is the part #4769-28. I attached a picture that shows a diagram for the winch for you to check out. You will be able to see how the…

view full answer...

Answer 9

The Replacement Spring for Fulton Winch #4769-28 that fits your Fulton winch T3205 is a torsion spring. The price of the spring is noted on the product page.

view full answer...

Answer 10

I have a few options for you to help with replacing the hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the…

view full answer...

Answer 11

From past experiences with your trailer we do know a bit about what hubs are typically going to fit but I would recommend you verify first by checking your trailer. We have found that your trailer has inner bearing L68149, ID 1.378, race OD 20362,…

view full answer...

Answer 12

One end of replacement spring #4769-28 goes through the smaller hole on the switch. The other end goes through a small hole on the winch housing itself. The spring will need to be oriented correctly to be installed. I have included a diagram that…

view full answer...

Is 4769-28 The Correct Replacement Spring for a Fulton T1802 Hand Winch

Continue Researching