What is the correct repair kit for the Fulton T1801?

Question

Question:

I need to replace the locking pawl on a Fulton T1801 but cannot find a kit that lists it as compatible. Will any of the kits work?

asked by: Joe K

0

Expert Reply:

Hey Joe, thanks for reaching out!

Since replacement parts for the Fulton T1801 are hard to find, we actually recommend replacing the whole winch.

The Dutton-Lainson # DL17042 is the best replacement because it has a winch capacity of 1,900 lbs with a 20' polyester strap.

The heavy duty design makes it more reliable long term and you'll avoid the hassle of trying to track down replacement parts later.

what are you winching down; boats, equipment, or gear?

expert reply by: James D

0

Joe K.

5/6/2026

I am winching a sailboat with a gross weight of 2500lbs.

James D.

5/7/2026

@JoeK Ok cool, It might be worth looking into the Dutton-Lainson Hand Winch - 2 Speed - 2,500 lbs # DL14830 For a sailboat, I’d lean toward the 2-speed models since they make the final pull onto the bunks much easier and put less strain on you.

Answer 1

The connection point for the 2013 Lincoln Navigator is under the instrument panel above the brake pedal. I have attached an image to better help you see where it is located. The custom fit wiring harness for your 2013 Lincoln Navigator is dependent…

view full answer...

Answer 2

Hello Allan; to add a 7-way you need the Universal Installation Kit for Trailer Brake Controller #ETBC7. This kit comes with the adapter, wiring, and everything else required to upgrade your existing 4-way to a 7-way. The #C55774 you were looking at…

view full answer...

Answer 3

I have a solution for you. The Fulton Single Speed Trailer Winch - 10" Long Handle, w/ 20 FT Strap - 1,800 lbs, #F142306, is the winch I recommend for your application. This winch uses a 2-way ratchet system and has a solid drum design which is…

view full answer...

Answer 4

I checked with my contact at Fulton who confirms that the #4769-28 replacement spring is indeed a fit for your Fulton T1802 hand winch. I've provided an exploded drawing showing how the spring sits on the winch.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 10

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 11

Hey Jonathan, congrats on the new truck! The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2026 Nissan Frontier SV. It measures 1-8/16" tall x…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

What is the correct repair kit for the Fulton T1801?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching