How To Find Correct Replacement Bearings and Seals for Forest River Rockwood Mini Lite 2204S

Updated 05/14/2025 | Published 02/27/2023

Question:

I have a 2021 Mini Lite 2204S and I am looking for axel seals. I would like to repack bearings and have new ones. How can I find a number, or can you help me.

asked by: Al D

Expert Reply:

I have a few options for you to help with identifying the bearings and seals on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings and seals based off industry standards. For example, a 3,500 lb axle uses L68149/L44649 bearings and a 10-19 grease seal like what comes with the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles part # BK2-100. The other option would be to take the hubs off the trailer and either read the part numbers off the old bearings and seal or measure them with a dial caliper to the nearest thousandth of an inch. I have attached an article that goes over this process in more detail.

I have also attached a few links with lists of our bearing/seal selection.

expert reply by: Conner L

David

4/29/2025

The dual axles I have state capacity 3900. On the front axle there is also a Unique ID: 614566262319 S/N 614566262 DEX # 9747800. Same goes for the rear axle with the exception of the Unique ID which ends with 2327. What can you tell me about the bearings and seal for this axle. Thanks

Robin H.

5/13/2025

@David the bearings are # L68149 and # L44649 with a 10-19 # RG06-050 grease seal. These parts are included in bearing kit # BK2-100. Sorry for the delay on this, our comments weren't coming through correctly.

David

5/13/2025

@RobinH This information is much appreciated because I never heard back from Dexter. Thank you very much. Dave J.

David

5/13/2025

@RobinH Just a question. So the axles I have on my 2021 Rockwood Ultra Lite RW camper have the Dexter ez lube spindles and the axles have on the data sticker CAPACITY 3900. Does the kit you recommend fit this axle as well as 3500 lb axles. My question is, are these the same spindles with different axle ratings?