Difference Between the Rhino-Rack Roof Rack Tracks Y01-140B-NT & Y01-120B-NT

Question

Question:

What is the difference between these Y01-140B-NT and part number Y01-120B-NT other than bar length. I will be using on a Leer truck shell with factory installed tracks.

asked by: Jim B

0

Expert Reply:

Hey Jim, there is no difference between the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT & # Y01-120B-NT, they are the exact same other than # Y01-120B-NT being 54" long and # Y01-140B-NT being 65" long.

expert reply by: Bryce D

0

Robin H.

1/5/2026

Hey Jim, how did the Rhino-Rack roof rack end up working with the factory tracks on your Leer shell? Knowing which bar length fit best could help others setting up a similar truck.

Jim B.

1/5/2026

@RobinH It worked perfect.

Answer 1

It sure will Bryan and thanks for the pics! The Rhino-Rack Roof Rack for Thule and Yakima Tracks item #Y01-140B-NT will indeed mount to your No Bo's Rhino-Rack tracks. The included quick release legs are going to drop right into your roof rails.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 8

Hey Steve, thanks for reaching out. We do have a good option for that. I recommend the following: - Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank - 8K GTW, 800 lb TW #C95MJ It’s designed for lighter trailers with 500–800…

view full answer...

Answer 9

Yeah, that things fun with camper shells. I've got exactly what you need though Lauren. If your Leer XR camper shell does not have tracks installed, I recommend the Rhino-Rack Heavy-Duty Roof Rack for Camper Shells item #Y01-120B with 54"…

view full answer...

Answer 10

Hey Greg! Yes, the Rhino-Rack Quick Mount Legs for Sportz Crossbars #RRRLT600H will fit the T-slot rails on your RetraxPRO XR. For a set of four under one part number we have the #RRRLT600. Regarding the clearance, the handle won't clear as is so…

view full answer...

Answer 11

Hey, Jim. You can definitely use rivets instead of the T-bolts to attach the tracks for the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B to your roof. We’re not able to swap the bolts out for rivets before shipping, but you should be…

view full answer...

Difference Between the Rhino-Rack Roof Rack Tracks Y01-140B-NT & Y01-120B-NT

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching