Search: rhino rack crossbars   >  

The Rhino Rack #Y01-140B-NT includes the crossbars, the roof rack feet and the hardware necessary to mount the feet into the existing Thule or Yakima-compatible rails in the channel on your Leer camper shell. Everything shown in the photos I provided…

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

According to my contact at Retrax, if you have a RetraxPRO MX Hard Tonneau Cover on your 2018 GMC Sierra 1500, then you can use the Replacement Trax Side Rails to add Trax Rails to your tonneau cover. I will just need to know what size bed you have…

I have a solution for you, but the Rhino Rack Pioneer Platform #RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of…

Yes, the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT does include locks. This product also includes 2 bars, 4 legs, and keys. This roof rack has a maximum carrying capacity of 220lbs, and measures 65" long, 1-5/8" wide,…

There are adapters for the Rhino-Rack Quick Mount Legs part #RRRLT600 that will allow you to use square crossbars but not round crossbars. If you can tell me what you are trying to do or what you have/need I would be happy to see if we have any other…

There are end caps on the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars #Y01-140B-NT that are tapered but the actual bar itself is not tapered so if you really wanted to cut them shorter you certainly could.

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

Instead of using the M8 T-Bolt #853-5715 for the Side Rails for Retrax XR Series Hard Tonneau Covers #RTT-82383 you can use the Square Nut #853-7557 instead. This has the same dimensions as the T-Bolt head section but this has threads for an M6 bolt…

My Retrax representative has confirmed that the Rhino Rack #RRVA180B-RRRLT600 roof rack quick disconnect feet and the 71 inch crossbar are indeed compatible with the accessory slots in the rails of your Retrax Pro XR tonneau cover. I've snipped a…

The EcoHitch Stealth Trailer Hitch Receiver #TL84CR sits right on the edge of the fascia so you would likely not need to trim it at all but may have to trim just a tiny bit under the vehicle right at the receiver tube if it fights you when you try to…

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…