Bearings and Grease Seal for 2024 Winnebago Micro Minnie 2100BH
Updated 01/05/2026 | Published 09/14/2024
Products Featured in This Question
Question:
Can you tell me what bearing grease seal do I need for 2024 micro Minnie 2100 BH. Thanks.
asked by: Ning
0
Expert Reply:
Hello Ning; according to Winnebago the 2024 Micro Minnie 2100BH has 3,000 lb axles. These use the same bearings as your standard 3,500 lb axle. If you want a bearing kit you can use the # BK2-100 which comes with bearings, races, and the grease seal. If you just want the bearings and seal separate you need the # L44649, # L68149, and # 58846.
expert reply by:
Robin H
0
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Quick Disconnect Propane Hose - 12'
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Bearing and Seal Kit for Lippert 4.4k Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Q&A: Replacement Bearings, Races, Grease Seals & Brakes For Lippert 4,400LB Axle On Jayco Travel Trailer
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
Robin H.
1/5/2026
Hey Ning, how did things go with the bearing kit for your Micro Minnie 2100BH? Did the parts fit your 3,000 lb axles as expected? Your update could make it easier for the next person with the same setup.