Will The Lippert Landing Gear Set # LC333694 Fit A 2021 Forest River Shockwave 28FWG DX
Updated 01/12/2026 | Published 09/04/2024
Question:
Lippert Electric Landing Gear Set - Weld On - 37 Lift - 6,000 lbs LC333964 Will this landing gear work on a 2021 Forrest river f28fwgdx shockwave. Thanks
asked by: Scott E
Expert Reply:
Hey Scott,
The Lippert Electric Landing Gear Set # LC333964 would have enough capacity to work for your trailer but you'll want to check your weld-stop spacing to see if you'll have to weld on new brackets. There unfortunately isn't a guide to tell us your weld-stop spacing so you'll need to measure from outside to outside edge and inside to inside edge of the weld-stops (see diagram below).
The # LC333964 has a 17-1/2" outside and 15-1/2" inside weld-stop spacing. If your spacing is different you'll need to cut the brackets off from the frame and have the new ones included in the kit welded to match the spacing.
(click to enlarge)
Product Page this Question was Asked From
Lippert Electric Landing Gear Set - 37" Lift - 6,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 5001 - 6000 lbs
- Electric Jack
- 37 Inch Lift
- Weld-On
- 2 Jacks
- Lippert
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: landing gear camper jacks
- Search Results: landing gear trailer jack
- Search Results: camper jacks
- Search Results: 5th wheel landing gear
- Shop: Lippert Electric Landing Gear Set - 37" Lift - 6,000 lbs
- Video: Ultimate Overview of the Lippert Electric Landing Gear Set
- Shop: Lippert Electric Landing Gear w/ Handle - Outside Mount - 34-3/4" Lift - 5,000-lbs
- Video: Feature Breakdown: Stromberg Carlson Electric Landing Gear Set
- Shop: Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Shop: Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs
- Video: In-Depth Review of the Landing Gear Set
- Video: All You Need to Know About the Landing Gear Set
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer jack
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: How to Choose a Trailer Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
on Camper Jacks
Samuel C.
1/12/2026
Hey Scott, what did you find when you measured the weld-stop spacing on your Shockwave? Once you confirmed that, were you able to see if the Lippert landing gear set lined up correctly? Your update could make it easier for the next person checking their trailer fit.