Looking For 36" Long Double Eye Leaf Spring

Question

Question:

Hello, I have a utility trailer with double eye leaf springs under it. The problem is, one set broke. These measure 36 from eye to eye. I do not see that option on your website. Is this something you offer?

asked by: Steve

0

Expert Reply:

Hello Steve, thanks for reaching out. We do carry a lot of double-eye leaf springs, but I am sorry to say that we do not offer anything 36" long. In fact, we do not have anything even close to that size. Our largest double eye spring is the # UG34FR which is 30" long for a 5,000 lb axle. Since you are replacing the springs on just one side, you will need to find a direct match for the current springs. The only solution I can offer you would be to replace the springs on both sides and this would involve relocating your spring hangers and welding on new ones to accommodate a shorter spring.

expert reply by: Jesse M

0

Jesse M.

1/12/2026

Hey Steve, did you end up finding a replacement spring that matched your trailer’s 36-inch setup or decide to go with the shorter ones and move the hangers? Knowing what worked could help others dealing with a similar spring size issue.

Ed D.

4/24/2026

@JesseM Would also be very interested in learning if he found a solution! I’m in the same boat needing a 36”x1.75” eye to eye spring!

Jesse M.

4/24/2026

@EdD Looks like we never heard back from our friend Steve here about the leaf spring. I still haven't heard of or seen that long of a double eye leaf spring. Just out of curiosity, what kind of trailer do you have?

Ed D.

4/24/2026

@JesseM Thanks for the prompt response! It’s an ASVE type 3k lb trailer I bought locally; no brand to speak of. Welded on hangers so I’m 100% certain the original ones were cut off for this project. I too have searched high and low for 36x1.75 leafs but it seems they were OEM on either very old trailers or very old light duty trucks from the front axle. I have the ability to reweld new spring hangers but was looking for an easier bolt-in option before.

See All (4) Replies to Jesse M. ∨

Answer 1

Those are some very unusual leaf springs, Thomas. The longest double eye springs we currently carry are 27" long, which are WAY too short. Even with slipper style springs, we have either some 30-1/2" options or a 44-1/8" option for a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Looking For 36" Long Double Eye Leaf Spring

Product Page this Question was Asked From

Continue Researching