Recommended Spare Tire Carrier for a Lawn Trailer

Question

Question:

Needing a spare tire carrier for my small riding mower trailer.

asked by: Robert H

0

Expert Reply:

So long as you do not have an enclosed trailer, the etrailer Spare Tire Mount for Trailer with Angle-Iron Railing item # e99045 will be the best option. It mounts on your trailer's angle-iron railing with included hardware and there's no drilling required.

I have linked an installation video below so you can see how to get it set up.

If that doesn't work we also have the CE Smith Offset Spare Tire Mount item # CE27310G that connects to the tongue.

expert reply by: Jerred H

0

Jerred H.

1/12/2026

Hey, how did the spare tire mount work out on your mower trailer? Your update could make it easier for others trying to find a good fit for a small trailer setup.

Answer 1

The only available trailer spare tire carrier we have for wheels with a 5 on 5 bolt pattern will be something like the Fulton Economy Spare Tire Carrier with Wheel Nut Lock #FETCSTL0701. If your trailer has an angle iron style frame then you could…

view full answer...

Answer 2

The etrailer Spare Tire Mount for Trailer with Angle-Iron Railing -item #e99045 is made in China. We have a few options for spare tire mounts that are made in America. I have listed them below: Offset Trailer Spare Tire Mount by Dutton-Lainson item…

view full answer...

Answer 3

That's interesting Tom, I can't even find that other picture you sent. The etrailer Spare Tire Mount item #e99045 comes with the bracket that has the welded tabs to connect to an angle-iron railing like you see in the pictures below. It was…

view full answer...

Answer 4

The bolts that come with the etrailer Spare Tire Carrier for Trailer with Angle-Iron Railing #e99045 are M12 size bolts which you could use a locking lug nut designed for that size with. Since that size is pretty rare a better option might be the…

view full answer...

Answer 5

We actually have a spare wheel carrier for trailers with angle-iron rails with the etrailer Spare Tire Carrier for Trailer with Angle-Iron Railing #e99045.

view full answer...

Answer 6

Hey Nate, We do not have a 3/4" spindle nut or washer, the smallest option is the 7/8" spindle nut #165931and a 1" washer #SW1000. I cannot find anything smaller. Are you sure the threads on you're spindle are 3/4"? If they…

view full answer...

Answer 7

Welcome back Jordan! I have an alternative for you but we do not have any Ram 7k jacks that can be bolted on. Just welded like item #TJD-7000S and pipe mount like item #TJDP-7000S-B options. For a 7,000 lbs capacity square jack that can be bolted on,…

view full answer...

Answer 8

Hi Bobby; the Lionshead Aluminum Talon Trailer Wheel #LH38MR is only available as just the wheel. We do not have a wheel and tire combination, or the ability to mount a specific tire on the wheels for you. You will need to order the tires separately…

view full answer...

Answer 9

The spare tire carrier I recommend that can be mounted to your trailer angle iron is the Redline Spare Tire Carrier, part #413200. This is a weld-on installation so you can mount it to your trailer in an location you have the room. This carrier works…

view full answer...

Answer 10

Hey George! Assuming you're looking for a complete kit, the Erickson ATV E Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM98CV you were looking at covers just about everything. This is compatible with 10" - 30" diameter tires,…

view full answer...

Answer 11

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Recommended Spare Tire Carrier for a Lawn Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching