Looking For Oil Bath Hub And Drum Assembly For 3,500 lb Axle 5 on 4-1/2"
Updated 01/27/2026 | Published 08/24/2024
Products Featured in This Question
Question:
Looking for oil bath hub and drum assembly for 3500 lb axel 4-1-2 on 5 lug.
asked by: Jr
0
Expert Reply:
Hello Jr, we have exactly what you are looking for. The Kodiak XL ProLube Kit # XLPROLUBE1980KIT will allow you to convert any 3,500 lb hub to an oil bath system. So you can use that along with the 3,500 lb Trailer Hub and Drum Assembly # AKHD-545-35-G-K which is a 5 on 4-1/2" bolt pattern.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Can Trailer Hubs with Grease be Converted to Oil Bath
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Availability Of Trailer Hub With .75" Outer And 1.25" Inner Bearings
- Article: Trailer Lighting Requirements
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Hub for E-Z Lube Spindle on Boat Trailer
- Q&A: Troubleshooting a Dexter Vault Hub that Has Popped Out Slightly
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: What Size of Boat Trailer do I Need?
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
Jesse M.
1/27/2026
Hey Jr, how did the oil bath setup work out with the Kodiak ProLube kit and the 3,500‑lb hub and drum assembly? Your update could make it easier for the next person looking to convert their hubs to an oil bath system.