Replacement Seals And Hubs For Boat Trailer W/ 3500lb Axles And Oil Bath Hub and Rotors
Updated 01/22/2021 | Published 01/20/2021
Products Featured in This Question
Question:
Oil bath hubs. Need new Rear seals. Will any seal work or does it require a special seal. Parts number please. Replacement oil bath hubs as well. need 2 Probablky with 9.75 inch disk and 2 just regular hub Typical Boat axle with tapered spindle. 35K i believe
asked by: Dan S
Expert Reply:
There are special seals to convert your 3500lb rotors to oil bath, and they can be replaced with Replacement Seal For 3500-lb Axles # XLPROLUBE1980SEAL.
While we do not offer 9-3/4" rotors for your 3500lb boat axle, we do have the Dexter 10" Hub-and-Rotor Assembly # K08-435-05 which measures 10" in diameter, and is designed for 3500lb axles. This rotor uses inner bearing # L68149, outer bearing # L44649, and grease seal # RG06-050(you will not need the grease seal as you will need the oil bath seals mentioned above instead), but they will need to be purchased separately as only the races are included with the rotor.
To convert the mentioned hub as a oil bath hub you will need to use the Kodiak XL ProLube Kit for 3500-lb Axles # XLPROLUBE1980KIT which includes the grease caps, oil seals, and lube.
For matching idler hubs I recommend the Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-545-35-K which uses the inner bearing # L68149, outer bearing # L44649, but uses grease seal # 58846. All of the require bearings, grease seals, races, and lug nuts come included with the idler hub assembly.
I included videos to each of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer ramp transition
- Search Results: hughes autoformers rv surge protectors
- Search Results: lp detector
- Search Results: 308200
- Shop: etrailer Aluminum Jeep-Style Trailer Fender 36" x 10" Single Axle - Qty 1
- Search Results: firestone 2582
- Search Results: trailer hub
- Search Results: firestone 2625
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Replacement Seal for Kodiak XL ProLube Kit for 3500-lb Axles
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Curt Venturer NEXT Trailer Brake Controller w/ Plug-In Harness - Up to 3 Axles - Time Delayed
- Shop: Curt TriFlex NEXT Trailer Brake Controller w/ Plug-In Harness - 1 to 4 Axles - Proportional
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Recommended Brackets and Rail Hardware For Old Demco 5th Wheel Rails
- Video: Replacement Flush Ball Seal for Dometic RV Toilet Review
- Q&A: Can a 2020 Ram 2500 with Rambox Tow Fifth Wheel Trailer
- Video: Bearing Buddy Bearing Protectors-BB1980A-SS Spec Review
- Q&A: Should Bolt Hole On Leaf Spring Hanger Be Larger Than Shackle Bolt
- Q&A: Oil Seal With 1.68 Outer Diameter And 2.56 Hub Inside Diameter
- Q&A: Are The DeeMaxx Hub/Rotor Assemblies Compatible With Kodiak 225 Calipers?
- Q&A: Replacement Hubs Based on Tapered Spindle Measurements
- Video: Kodiak XL ProLube Kit for 3500-lb Axles Feature Review
- Video: An In-Depth Look at the Kodiak Disc Brakes