Looking For Trailer Hitch For 2009 Toyota Camry

Question

Question:

I have a Toyota Camry 2009 and Im looking for a trailer hitch for the car. I once found it on the site but now it seems like the year is not available. Thx

asked by: Chris M

0

Expert Reply:

Hello Chris. We do offer a hitch for the 2009 Toyota Camry. For that I recommend the Curt Class 2 Hitch # C12343. This has a 1-1/4" receiver and is rated for towing up to 3,500 lbs. You will find a link to our install video linked below.

If you plan to tow a trailer you will also need the Curt T-Connector # C55567.

expert reply by: Jesse M

0

Chris M.

8/28/2024

Thanks Jesse, appreciate you getting back to me. My plans are to purchase a bike rack and at most I will have 2 bikes on the rack. I'll check it out this weekend. Thanks again Chris

Jesse M.

8/28/2024

@ChrisM Ok cool! We carry a bunch of 2 bike racks that will work with the 1-1/4" receiver. The link below will show you our full selection of compatible racks. Personally, I am partial to the Kuat racks, since I have been using one myself for about 4 years now. The rack is easy to use and super durable. Feel free to browse or let me know if you are looking for something specific.

Helpful Links

dept-pg-hitch_bike_racks-sz-fits_1%7e1%7c4_inch_hitch.aspx

Answer 1

Hello Joshua, thanks for reaching out. I wish I had better news but there isn't a 2" hitch receiver made for the 2010 Toyota Camry. Like you said, the vehicles tow rating puts it in the 1-1/4" category, and hitch manufacturers just…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Looking For Trailer Hitch For 2009 Toyota Camry

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching