Recommended Front Hitch for a 2024 Toyota Tundra Hybrid TRD PRO

Question

Question:

Will this fit the 2024 Tundra Hybrid TRD PRO?

asked by: Jim

0

Expert Reply:

Hi Jim, yes the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH89CR will fit your 2024 Toyota Tundra Hybrid TRD PRO.

expert reply by: Bryce D

0

Jesse M.

1/27/2026

Hey Jim, how did the EcoHitch front hitch fit on your Tundra Hybrid TRD PRO? Your update could make it easier for the next person with the same truck.

Jim

1/27/2026

@JesseM The front hitch fit well, in order to not modify anything on the front of the truck or removed any parts of the bumper for installation, etc. I installed the hitch upside down. This means it sits below the bumper but has the same clearance as the shields underneath the TRD PRO and doesn't impact the clearance while off road. I use mine for plowing with a snowsport plow and it works great, easier to get to the pin as well on the receiver. Does not hide the receiver like it would if I installed it right side up, but does the job and installed it in a few minutes. Hope this helps.

Jesse M.

1/28/2026

@Jim Hey Jim, thanks for the feedback! Good call on flipping the crosstube upside-down. Not something we would typically suggest, but I am glad to hear it worked out. Thanks again for taking the time to share. I'm sure this will be helpful for others with similar setups.

Answer 1

The BAK Revolver X4 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black part #BAK79602 that you have asked about weighs in at just over 70 lbs. including the rails. As far as carrying a load on the top of it it is rated for up to 400 lbs.…

view full answer...

Answer 2

Hello Tim. Yes, the EcoHitch #EH89CR for the 2023 Toyota Tundra does come with instructions and they have a diagram that will show you exactly where to cut. Sadly, there is no online version of these instructions that I can send you, but they will…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 12

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Recommended Front Hitch for a 2024 Toyota Tundra Hybrid TRD PRO

Product Page this Question was Asked From

Continue Researching