4-Way Vehicle Wiring Harness For a 2022 Hyundai Kona N

Question

Question:

Does this fit the 2022 Kona N?

asked by: Antonio

0

Expert Reply:

Since your 2022 Hyundai Kona N is going to have LED tail lights you are going to need the Tekonsha 4-way # TK63CR. The Curt # C53ZV is not compatible with the LED tail lights.

expert reply by: Bud M

0

Jameson C.

2/17/2026

Hey, how did the Tekonsha 4-way wiring harness work out on your Kona N? Knowing if it connected well with the LED tail lights could help others with the same setup. Your feedback would be great for anyone comparing these harness options.

Answer 1

Yes, we have confirmed with Curt that the T-Connector Vehicle Wiring Harness #C53ZV will fit with the tail lights on your 2023 Hyundai Kona just fine.

view full answer...

Answer 2

Hey Debra! A 2" hitch will definitely work. I recommend the Draw-Tite item #DT52GR. This hitch is custom fit for your 2022 Hyundai Kona SEL. It has a 2" receiver with a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. If you…

view full answer...

Answer 3

Yes, we do have a 2" hitch for the 2023 Hyundai Kona. It is the EcoHitch item #EH26SR. This hitch is custom fit and bolts to your Hyundai with included hardware. This 2" hitch has a 2,500 lbs towing capacity and a 375 lbs maximum tongue…

view full answer...

Answer 4

The EV version of the 2019 Hyundai Kona is the fully electric version which we have the Draw-Tite Max-Fram Trailer Hitch #DT52GR. This is a class 3 hitch with a 2" receiver opening. This will give you a wide array of bike racks from which to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

4-Way Vehicle Wiring Harness For a 2022 Hyundai Kona N

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching