Will The Tekonsha Trailer Wire Harness # 119250KIT Work With A 16v 2022 Tesla Model Y Battery

Question

Question:

I have a 2022 Tesla Model Y with a 16 volt system not a 12 volt. Will this trailer wiring harness work with a 16 volt system?

asked by: Dale M

0

Expert Reply:

Hey Dale,

No, the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT is only compatible with 12v systems. Since Tesla switched over to 16v batteries in 2022 you'll need to purchase a step down regulator to drop the voltage down to 12v for the wire harness to function.

expert reply by: Kevin C

0

Answer 1

The EcoHitch Stealth Trailer Hitch Receiver part #EH84GR is a fit for the 2020 Tesla Model 3. The EcoHitch is completely hidden behind the bumper and has a removable square receiver tube. The receiver tube unbolts from the cross body of the hitch.…

view full answer...

Answer 2

Hey Bjorn, We do have a wiring harness for that 2019 Model 3. Along with that hitch, #EH84GR, I recommend the wiring harness #119250KIT. This is going to give you a 4 flat connection at the rear of the vehicle, and better yet it is a plug and play…

view full answer...

Answer 3

Hey Bryan, yes the ZCI kit part #119250KIT does 2023 Tesla Model 3.

view full answer...

Answer 4

The best wiring harness for your 2023 Tesla Model 3 is going to be the T-One Vehicle Wiring Harness item #TK35VR. This harness is custom-fit and plugs into existing wiring in the rear cargo area. This will give you a 4-way connector to control your…

view full answer...

Answer 5

The ZCI Circuit Protected Vehicle Wiring Harness #119250KIT will be the best option for a no-splice wiring harness for your 2021 Tesla Model Y. The kit will completely bypass the factory wiring. It uses sensors that clamp on to the factory wiring and…

view full answer...

Answer 6

Good question, Kurt! It took me a minute to figure it out, but the is one very minor difference. That being, the #119250KIT includes an added circuit tester (see pictures below). The actual wiring part ( #119251 ) is exactly the same for both parts.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Will The Tekonsha Trailer Wire Harness # 119250KIT Work With A 16v 2022 Tesla Model Y Battery

Continue Researching