Does Curt Trailer Wiring Harness C63RV Fit 2024 Kia Sorento S

Question

Question:

will this work for a 2024 sorento S ?

asked by: Mike V

0

Expert Reply:

Hey Mike, yes the Curt trailer wiring harness part # C63RV does fit the 2024 Kia Sorento S.

expert reply by: Jameson C

0

Answer 1

Hey Brandon, we have the Curt trailer wiring harness part #C63RV that is a confirmed fit for your 2025 Kia Sorento with LED taillights and is a plug and play model that does not require any splicing. I attached a link to an install video for this kit…

view full answer...

Answer 2

Hi Jay; is your 2025 Kia Sorento SX Prestige the hybrid model? It looks like that trim is available for the regular and hybrid models of the Sorento. If it is not a hybrid you can use the #C99DR you were looking at. If it is a hybrid you can use the…

view full answer...

Answer 3

Hey Robert, thanks for reaching out! According to Curt the T-Connector Vehicle Wiring Harness #C63RV is compatible with LED tail lights on your 2024 Kia Sorento, so you'll be able to us this to tee in behind your tail lights as opposed to…

view full answer...

Answer 4

Hi Robert; the Curt #CU94FR is not confirmed to fit the 2024 Sorento. If you have LED lights you will need the #C99DR and if you have incandescent the #C63RV. None of the aftermarket wiring harnesses will fit your 2024 Kia Sorento EX tow package plug…

view full answer...

Answer 5

Yes, the Curt T-Connector Wiring Harness item #C99DR will fit the PHEV model of the 2023 Kia Sorento. This custom-fit T-connector plugs into your Kia's wiring harness, which is located behind the tail lights. To round out your towing setup I…

view full answer...

Answer 6

Hello Nolan; the #e98843 fits the 2016-2020 models of the Sorento. You will need a different hitch since there have been changes to the frame that won't allow the old one to fit. We don't have an etrailer hitch for the 2022 but you can use…

view full answer...

Answer 7

Hey Carmin, thanks for reaching out! The hitch and wiring I recommend for your 2024 Kia Sorento SX Prestige PHEV is the following: - Curt Trailer Hitch Receiver #C37RV - Curt T-Connector Vehicle Wiring Harness #C99DR - Mounting Brackets #18144 and…

view full answer...

Answer 8

Hello Jim, thanks for reaching out. According to Kia, the tow package connections on a 2024 Sorento will be under the driver's side rear bumper cover. We have not been notified of any changes for the 2025 models, but it is too soon to say for…

view full answer...

Answer 9

In the event your 2023 Kia Sorento SX Prestige plug-in hybrid has the factory tow package wiring you will need either the Tekonsha 4-Way #118269 or 7-Way #TK24FR. You can determine if you have the factory connectors by checking in the rear drivers…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Curt Trailer Wiring Harness C63RV Fit 2024 Kia Sorento S

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching