What Does Stromberg Carlson Bike Bunk Trailer # CC-275 Weigh

Question

Question:

What is the weight of CC-275 itself, not its capacity?

asked by: Laura A

0

Expert Reply:

Hey Laura, the weight of the Stromberg Carlson Bike Bunk part # CC-275 is 47 lbs.

expert reply by: Jameson C

0

Answer 1

The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100lbs Item #CC-275 has a max weight capacity of 100lbs so it wouldn't be able to support the bike rack and 4 bikes. Instead you can install a Curt…

view full answer...

Answer 2

I recommend first installing a trailer hitch on the back of your Rpod, and then a hitch mounted bike carrier. The trailer hitch I recommend is the Curt Adjustable Width Trailer Hitch, part #13703. This will work with RVs that have a frame width…

view full answer...

Answer 3

I have a great option for you. When using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers #CC-275 there are a few parameters you will need to stay within. The bike rack needs to be travel trailer rated, fit a…

view full answer...

Answer 4

A 4 bike rack on the front of a travel trailer really wouldn't be possible. We have bunk adapters like the #CC-275 but you wouldn't have the needed clearance for 4 bikes most likely. Is it possible to install a roof rack style of bike rack on…

view full answer...

Answer 5

If you add a dual receiver adapter like the Curt Dual 2" Receiver Tube Adapter, 8" Extension #D-192 to your Toyota Tacoma, it will not only add the tongue weight, but will reduce your hitches tongue weight capacity by 50%. I recommend going…

view full answer...

Answer 6

I have a solution that will allow you to continue using your weight distribution system and carry a bike but you can't use a dual hitch adapter with a weight distribution system. One solution is the bunk adapter for your trailer part #CC-275.…

view full answer...

Answer 7

You will be able to back up with the Reese Pro Round Bar Weight Distribution item #RE34FR set up. It may be a lot easier to remove the springbars from the weight distribution system first but it isn't necessary. You won't have any issues with…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

What Does Stromberg Carlson Bike Bunk Trailer # CC-275 Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching