Recommended Trailer Mounted Bike Rack For A-Frame Trailers

Question

Question:

The dual mount with ball Does it have the ball to connect the antisway to?

0

Expert Reply:

If you add a dual receiver adapter like the Curt Dual 2" Receiver Tube Adapter, 8" Extension # D-192 to your Toyota Tacoma, it will not only add the tongue weight, but will reduce your hitches tongue weight capacity by 50%. I recommend going with the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100 lbs # CC-275 which will allow you to use your current rack, and will add that trailer tongue weight, but will not reduce your hitch's tongue weight capacity at all. This is a better option for transporting a large trailer and bikes.

If you want to have the bike rack on the rear of your Tacoma, you can use the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210 as long as the weight of your trailer doesn't exceed its capacity. This allows you to use a bike rack with your trailer connected, but you have to connect your trailer then add the bike rack due to its limited distances.

expert reply by: Jason S

0

Karl

7/6/2017

The dual mount with ball Does it have the ball to connect the antisway to?

Jason S.

7/6/2017

If you use the Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs # D210, then to add the friction bar anti-sway you need th Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV # RP26003 to mount the anti-sway friction bar ball onto. This combination will not reduce the tongue weight capacity of your hitch, but you will need to account for the additional tongue weight of the bike rack and bikes when installed. If you need a the sway bar ball, you can use the Curt Sway Control Hitch Ball # C40093. For a hitch ball for the ball mount you will want # 63845 for a 2 inch ball or # 63847 for a 2-5/16 inch ball to match your trailer coupler.

Answer 1

When the Stromberg Carlson Bike Bunk Bike Rack Carrier for A-Frame Trailers, #CC-275, is being used with a pop-up type camper, its removal is completely dependent on height of your trailer. Many of the high wall and hard wall A-frame pop-up campers…

view full answer...

Answer 2

Hey Dale! Sorry to say but they stopped putting the brake controller adapter plugs in the Jeep Grand Cherokees a few years back. 2020 was the last model year they included them. The Curt Echo item #C51180 is going to be the only plug and play option.…

view full answer...

Answer 3

The Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers - 2"-100lbs Item #CC-275 has a max weight capacity of 100lbs so it wouldn't be able to support the bike rack and 4 bikes. Instead you can install a Curt…

view full answer...

Answer 4

I recommend first installing a trailer hitch on the back of your Rpod, and then a hitch mounted bike carrier. The trailer hitch I recommend is the Curt Adjustable Width Trailer Hitch, part #13703. This will work with RVs that have a frame width…

view full answer...

Answer 5

A 4 bike rack on the front of a travel trailer really wouldn't be possible. We have bunk adapters like the #CC-275 but you wouldn't have the needed clearance for 4 bikes most likely. Is it possible to install a roof rack style of bike rack on…

view full answer...

Answer 6

First you will need a receiver on the front of the trailer if you want to use a hitch bike rack. We actually have the Bike Bunk #CC-275 but it is limited to 100 pounds total weight. Otherwise what I recommend is to use #D210 which has a receiver and…

view full answer...

Answer 7

I have a solution that will allow you to continue using your weight distribution system and carry a bike but you can't use a dual hitch adapter with a weight distribution system. One solution is the bunk adapter for your trailer part #CC-275.…

view full answer...

Answer 8

I have a great option for you. When using the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers #CC-275 there are a few parameters you will need to stay within. The bike rack needs to be travel trailer rated, fit a…

view full answer...

Answer 9

Hey Laura, the weight of the Stromberg Carlson Bike Bunk part #CC-275 is 47 lbs.

view full answer...

Answer 10

I do have an option for you but the factory tail lights on an older Jayco Eagle Pop-Up wraparound to the outside of the trailer and none of the aftermarket replacement will have this feature. That said, you could pretty easily replace them with some…

view full answer...

Answer 11

The Wesbar light #271594 hangs on studs so it would not work in place of the lights on your Jayco trailer but I do have another recommendation. Take a look at light #RVSTL61 for the left and #RVSTL60 for the right. These lights have mounting holes…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Recommended Trailer Mounted Bike Rack For A-Frame Trailers

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching