Recommended Trailer Wiring Harness for a 2024 Toyota Venza

Question

Question:

When you look at your description for the C57ER if specifically states NOT CONFIRMED to work on a 2024 Toyota Venza! Then down in the QandA someone states this is a perfect fit for the 2024 Venza. So, one has to wonder should they take a chance on your C57ER actually working on a 2024 Toyota Venza. Can you give me some more confidence in purchasing this set to work on my vehicle? Thanks Jerry

asked by: GERALD K

0

Expert Reply:

Hey Gerald, so I did double check with Curt, the people who make the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C57ER, and confirmed that it does fit a 2024 Toyota Venza.

I'm guessing the reason it says it does not fit in our system is because we haven't had an opportunity to update the page or test it ourselves, but either way, this harness does fit your vehicle.

expert reply by: Bryce D

0

Gerald K.

5/24/2024

Thanks a bunch for reassurance on the wiring. Order place. Jerry

Bryce D.

5/27/2024

@GeraldK Thanks Jerry!

Joan

6/10/2025

@GeraldK Jerry I am wondering if all went well with wiring the 2024 Venza? I too have the same year and wondered if it followed the same install as the video linked to the part number? Thanks

Jameson C.

6/10/2025

@Joan Jerry will get a notification that you asked him a question but in meantime we do know that the Curt trailer wiring kit part # C57ER does fit the 2024 Venza so it will work for you. I linked an install video for you to check out as well.

Helpful Links

tv-install-curt-4-pole-trailer-wiring-harness-2021-toyota-venza-c57er.aspx

Answer 1

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 2

The Curt trailer wiring harness #C56079 does require a direct connection to the vehicle battery. This is what will power the trailer lights. It is designed this way to protect the sensitive wiring on the vehicle from any shorts that could end up…

view full answer...

Answer 3

No you would not want to wire the module on the #C56434 to the 12v receptacle in the rear. Main reason being this outlet may not have enough power to power the outlet and the trailer lights at the same time. A wire will have to be run directly to the…

view full answer...

Answer 4

I recommend our etrailer Trailer Hitch Receiver #e25AR as the best option for your 2024 Toyota Venza. I feel this is the best option as the matte black finish gives it a cleaner appearance compared to the gloss black finish used by most other…

view full answer...

Answer 5

The Curt trailer wiring kit part #C57ER that you referenced that fits your 2022 Toyota Venza does not relocate the sensor for the hands free liftgate of your vehicle. We do not offer kits like this for any vehicles but with a hitch installed on your…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Recommended Trailer Wiring Harness for a 2024 Toyota Venza

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching