Complete Repair Kit For a Roadmaster Falcon Tow Bar Model 5250

Question

Question:

Hi I have the 5250 falcon tow bar is the repair kit for the Falcon 2 correct for this bar also. Thanks jim

asked by: Jim C

0

Expert Reply:

You are going to need the Repair Kit # RM-910003-55 for your Roadmaster Falcon 5250 tow bar. The Kit # RM-910003-60 you found is only for the Roadmaster Falcon 2 # RM-520 or BlackHawk # RM-422 tow bar.

expert reply by: Bud M

0

Answer 1

The first thing you should do is check the bar with a straight-edge to determine if it is bent. If you determine that it is straight you will need to disassemble it and clean it. There is a nut on the forward end by the pivots, and a keeper assembly…

view full answer...

Answer 2

Great question Derrick. Since your Falcon 5250 tow bar has a serial number 047443 you will use the bushings included in the Complete Repair Kit #RM-910003-55. The Bushings #RM-200031-00 are used in place of the bushings in the repair kit if the tow…

view full answer...

Answer 3

There are a couple of options you can do to attempt to free up the arms on your Roadmaster Falcon All Terrain, Non-Binding Tow Bar #RM-522. What you can do is try and spray the arms with a degreaser, then move the arms in and out and rise with some…

view full answer...

Answer 4

Hey Alfred, the Roadmaster Falcon 5250 tow bar has a 5,000 lb towing capacity. Do you have a base plate for your towed vehicle?

view full answer...

Answer 5

Have you tried cleaning and lubing the arms yet? Here's how to do that in case not: I contacted Roadmaster about instructions on cleaning their tow bars. Our contact at Roadmaster informed me that you will want to start by soaking the arms with a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Complete Repair Kit For a Roadmaster Falcon Tow Bar Model 5250

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching