Product Experts Available Now!
Call 1-800-940-8924
Complete Repair Kit for Roadmaster Falcon Tow Bar Model 5250
(63 reviews)
Price: $103.68
In Stock
Roadmaster
Complete Repair Kit for Roadmaster Falcon Tow Bar Model 5250
Part Number: RM-910003-55
In Stock
$103.68
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (63)
- Q & A (0)
- Photos
Roadmaster Accessories and Parts - RM-910003-55
- Tow Bar
- Repair Kit
- Roadmaster
- Falcon
Replace the hardware and Autowlok buttons on your older Roadmaster Falcon tow bar, model 5250.
Features:
- Replaces the hardware and Autowlok buttons on your older Roadmaster Falcon tow bar model 5250
- Includes kit for Autowlok buttons:
- 2 Autowlok buttons
- 2 Button stems
- 2 Springs
- 2 Pins
- 2 Outer arm bushings
- (2) 1-1/4" Acetyl inner arm bushings
- 1 Epoxy glue kit
- Includes kit to replace the hardware on the tow bar:
- 2 Shoulder bolts
- 2 Nylok nuts
- (2) 3/4" Locking nuts
- (6) 1-1/2" Diameter acetyl washers
- (4) 3/4" Diameter acetyl washers
- 2 End caps
- 2 Rubber bump-ons
Note: If the serial number on your Falcon tow bar is lower than 23240, you will also need two RM-200031-00 bushings (sold separately) to complete the repairs on your tow bar.
910003-55 Road Master Replacement Hardware Kit for Falcon Towbar 5250 - Replacement Auto Lock Buttons
Installation Details
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
63 reviews
by:
Gil
06/14/2026
I only recently learned this kit existed. It took some work to overhaul my 25 year old Falcon 5250, mainly because of bolts that didn't want to come off. But now it feels almost as good as new!
by:
Jerry S
10/10/2016
I have 200,000 miles on this Roadmaster Falcon 5250 towing a 2000 Ford Explorer 4 down. I have replaced some bushings at about 100,000, and just did the rebuild with the above kit. Other than my paint job, the tow bar is like new again. Nice and tight at all connections.
Jerry S.
10/10/2017
Thanks for the follow-up. All is fine. I havent needed anything. My Roadmaster Tow Bar works great.
by:
Bob M
01/07/2019
Great etrailer service: received repair kit promptly and good communications.
I had an old and well used 5250 tow bar that wasn't locking up reliably, was hard to unlock and sloppy, so I needed the full repair kit (-55 vs. -50). The picture shows the extra parts you get in the full kit. Those few extra parts add about $xx.xx to the cost of the -50 kit, so decide if you need the full monty.
As to the full kit, the parts provided replaced all the wear points and fit fine. The instructions are adequate for any handy person who can grasp the operating concept. The large swivel bolts and nuts were very hard to remove with only basic hand tools available to me. I'm going to ding Roadmaster for vague instructions; e.g., "Remove the outer arm bushing." A little advice would have helped. Those bushings were glued in and I only got them out by using a thin blade screwdriver to chisel between the bushing and arm until the bushings were mostly destroyed. Another ding for cost/value of extra parts. But, having a better working tow bar for about $xx.xx is a lot less than cost of a new one. Four stars.
I had an old and well used 5250 tow bar that wasn't locking up reliably, was hard to unlock and sloppy, so I needed the full repair kit (-55 vs. -50). The picture shows the extra parts you get in the full kit. Those few extra parts add about $xx.xx to the cost of the -50 kit, so decide if you need the full monty.
As to the full kit, the parts provided replaced all the wear points and fit fine. The instructions are adequate for any handy person who can grasp the operating concept. The large swivel bolts and nuts were very hard to remove with only basic hand tools available to me. I'm going to ding Roadmaster for vague instructions; e.g., "Remove the outer arm bushing." A little advice would have helped. Those bushings were glued in and I only got them out by using a thin blade screwdriver to chisel between the bushing and arm until the bushings were mostly destroyed. Another ding for cost/value of extra parts. But, having a better working tow bar for about $xx.xx is a lot less than cost of a new one. Four stars.
Bob M.
2/20/2020
After a year of use, the tow bar is still working fine. I traded my car for one that had a Blue Ox baseplate. So I bought the Blue Ox adapters from etrailer for the Falcon towbar, and it continues to tow on very well.
by:
Doug K
01/15/2017
Very pleased with the Roadmaster Falcon 2 tow bar repair kit. First tow bar arm took me a little longer than the second one. But they work like new after I installed all the repair components. Second item I have purchased from e-trailer and I am extremely happy with their products an instructions. Will definitely do business with them in the future.
Doug K.
1/15/2018
Very happy with the quality of the tow bar repair kit!
by:
Tim Tregre
04/22/2017
Unfortunately the six 1-1/4" (large white washers) were not in the complete kit as described and seen in the photos by the manufacturer. All other parts were in the plastic package including the instructions. The clear package inside of the shipping package was a ziplock type bag so I could not tell if it was previously opened. Since my original washers were in satisfactory order and I had everything already apart, I did not bother to call and wait for new washers to be shipped. All my other items purchased from etrailer were excellent. I will not hesitate from ordering from them again.
Tim T.
4/22/2018
The rebuild kit is still doing great. After seeing my review etrailer sent me the missing washers! Outstanding customer service!!
by:
Gary
10/11/2021
Got here quick and everything fit as I knew it would. etrailer has got it together! The only thing I’d suggest is torque specs on those huge bolts. One probably can’t be too tight but the one that allows the arms to spread can be. It was so hard to break loose that I cranked down on it to tighten but then it was too tight to spread the arms. I had to loosen it up a bit.
Gary
10/12/2022
Flawlessly. Just what my old Roadmaster needed. I didn’t buy my motorhome to just look at it. Lots of miles in the last year and all of them towing a car.
by:
Richie
10/21/2017
I had to rebuild a Roadmaster falcon 5250 hitch. delivery was quick, had the parts in my hand with a repair manual. I rebuilt the hitch and was back on the road again. what was most intriguing was when they told me, after rebuilding the hitch to take a picture of send it to them for review I thought that was pretty cool. Because etrailer was then thinking about my safety. Which told me selling parts and equipment is not what they bare all about. for all your towing and trailer needs checkout etrailer.
Thank you.
Thank you.
by:
David
11/30/2021
quick shipping. easy instructions. release buttons are a pain to put on.
David
12/1/2022
Works great a year later working just fine
by:
Tyronne
08/06/2021
The Roadmaster Falcon Tow Bar 5250 rebuild kit worked perfect!
It was very easy to rebuild the tow bar and had everything I needed.
It was very easy to rebuild the tow bar and had everything I needed.
by:
mike
01/29/2017
I have a VERY old falcon 5250 (serial # 3530). Installed this kit in about one hour. Hardest part wad getting the pin back thru the hole but with the use of a dowel rod and thin screw driver I was able to get them in place very quickly. Once the pin 's were in the rest was easy.
by:
Texans
09/16/2016
I have a Roadmaster Falcon 5250 vehicle tow bar. The bushing came unseated.
Etrailer supplied the only rebuild kit on the market that I could find.
The parts in the kit should make my hitch like new. It came with everything, including very easy to read installation instructions.
Etrailer supplied the only rebuild kit on the market that I could find.
The parts in the kit should make my hitch like new. It came with everything, including very easy to read installation instructions.
by:
BobD
01/30/2015
I finally got around to rebuilding my towbar. The kit included all of the parts I needed. The instructions that came with the parts were a little tricky to follow in places (some steps seemed to be out of order), but I was able to work through them and get the job done.
by:
Robert
07/07/2021
I received the overhaul kit for the falcon towbar earlier than predicted and with the instructions it was an easy overhaul. I’ve towed my Jeep about 400 miles and all seems to be working well.
by:
Leonard B.
11/14/2016
I was feeling a bit intimidated by the prospect of repairing the hitch. However, the video's made everything very clear. And the best part was not needing to spend $600 on a new one. It has not given us one second of trouble since the repair.
by:
Lawrence
06/24/2020
rebuild was good but I needed 3\4" socket set plus 3ft pipe extension
I am not superman any more.
Will order more from etrailer.com when needing
[fixed my falcon towbar]
I am not superman any more.
Will order more from etrailer.com when needing
[fixed my falcon towbar]
by:
Tom
08/01/2019
The kit was complete and arrived promptly. My only issue with the instructions would be they say to remove the bushings, not mentioning the bushing are glued in place and must be destroyed to remove them. I reversed the shaft and used it as a guide to help install the new bushings. Nice kit, good service.
by:
C Skeels
08/06/2017
Thank you for the great service. Parts came on time and instructions were good. Had the tow bar apart and back together in four hr. Thank you again for your service.
by:
Jerry
03/19/2020
Haven't use the product yet everything was in package the instructions were very good going use kit rebuild falcon 5250 shipping was very fast
by:
Leroy
04/03/2018
All the pieces and parts I needed to renew my tow bar came in one handy kit and fit perfectly. Thanks for making it availalble.
by:
RT S.
09/21/2019
Bought to rebuild Falcon tow hitch. Everything fit like new.
by:
Eddie T
08/10/2015
Package arrived on time. All parts were included and after a couple readings of the instructions I rebuilt my 5250. Only problem was that mine is so old (12 years) that the included outside arm bushing would not fit. That's ok since the original was still in good shape.
by:
Terry M.
01/27/2017
Received and installed as expected. Instructions were excellent
by:
James
03/10/2021
If you follow Instructions & don't try to speed up the process you will have no problems . The kit made unit like new !
by:
Rick C.
10/14/2015
Fast shipping and great product.
Tow bar now like new.
Thanks,
Tow bar now like new.
Thanks,
by:
Ron
01/30/2018
All the right parts were there and properly made. A good honest product.
25
63
true
Show More Reviews
See what our Experts say about this Roadmaster Accessories and Parts
- Rebuild Kit for Roadmaster Falcon Tow Bar Model 5250Great catch Harry! The combination of the Replacement Hardware for Roadmaster Falcon Tow Bar Model 5250 # RM910003-52 and the Roadmaster Autowlok Repair Kit for Falcon Tow Bar Model 5250 # RM-910003-50 will give you the same rebuild components included with the Complete Repair Kit # RM-910003-55. I'm not sure what's driving the price difference here but given the current pricing and availability, I'd definitely go with # RM910003-52 and # RM-910003-50 separately. Also, your serial number...
view full answer... - Is Roadmaster Falcon 5250 Tow Bar Compatible with Direct-Connect Base Plate Kit for 2020 EnvisionYes, the Falcon 5250 tow bar is compatible with the Roadmaster Direct-Connect Base Plate Kit # RM-523196-5 for your 2020 Buick Envision. This particular tow bar has been discontinued for a while now so I would imagine that you'd need the Repair Kit # RM-910003-55 to make sure everything has been properly serviced on the tow bar and that it's safe to use. I would personally prefer to go with a brand new Falcon 2 Tow Bar # RM-520 simply because you are towing a brand new vehicle, but I...
view full answer... - Where do I Find the Serial Number on a Roadmaster Falcon Tow BarThe serial number is located on the passenger side tow bar arm. See the attached illustration.
view full answer...
- Solution for Roadmaster Falcon 5250 Tow Bar Arm Not Easily Moving In and OutThe solution for your Roadmaster Falcon 5250 tow bar is the Roadmaster Complete Repair Kit # RM-910003-55. I spoke with my contact at Roadmaster and he confirmed that you will want to use the repair kit to replace the components in your tow bar. I have attached the installation instructions to this kit for you. When the tow bar is apart, my contact at Roadmaster said that to clean to the tow bar you will want to use a simple degreaser, non-abrasive brush, and only silicone spray. My...
view full answer... - Complete Repair Kit For a Roadmaster Falcon Tow Bar Model 5250You are going to need the Repair Kit # RM-910003-55 for your Roadmaster Falcon 5250 tow bar. The Kit # RM-910003-60 you found is only for the Roadmaster Falcon 2 # RM-520 or BlackHawk # RM-422 tow bar.
view full answer... - Recommended Tow Bar Upgrade for a Remco IV Tow BarCurrently we only have repair kits available for the Roadmaster Stowmaster # RM-910003-20, Nighthawk, Sterling, Sterling All-Terrain Tow Bars # RM-910003-30, Falcon 2 and BlackHawk # RM-910003-60, as well as the Falcon Tow Bar Model 5250 tow bars # RM-910003-55. So for your Remco tow bar I recommend reaching out to them for a repair kit, or if you're feeling like it's time for a change, an upgrade. According to my research Remco tow bars should be compatible with all Blue Ox Base plates,...
view full answer... - Should Complete Repair Kit for Roadmaster Falcon 5250 Tow Bar be Used and Kit InstructionsThe best option for your Roadmaster Falcon 5250 tow bar is to use the Complete Repair Kit for Roadmaster Falcon Tow Bar 5250 # RM-910003-55 because it will allow you the most service to your tow bar - replacing its shoulder bolts, bushings, washers and end caps. I also want to note that you should check the tow bar's serial number; if it is lower than 23240, you will also need 2 of the # RM-200031-00 replacement bushings for a complete repair. I have added a cut out from the installation...
view full answer...
- Repair Kit for Roadmaster Falcon 5250 Tow BarI think you might have meant the Falcon 5250 tow bar. The complete repair kit is # RM-910003-55. This kit contains the components to replace the Falcon 5250 shoulder bolts, bushings, washers and end caps and also contains the components to replace the inner and outer tow bar arm bushings and Autowlok button assemblies. For the Autowlok repair kit only use # RM-910003-50. And if you just need shoulder bolts, bushings, washers, and end plugs use # RM910003-52.
view full answer... - Rebuild Kit for Roadmaster Falcon All Terrain Tow Bar Where Arms are Difficult to Move In and OutInspect the inner arms to make sure they aren't bent, but as long as they are straight yes it would be smart to rebuild the arms with the part # RM-910003-55. Based on your serial number you'd also need two of the # RM-200031-00 as well.
view full answer... - Do My Falcon Tow Bars 5250 Need The RM-200031-00 Bushings? Great question Derrick. Since your Falcon 5250 tow bar has a serial number 047443 you will use the bushings included in the Complete Repair Kit # RM-910003-55. The Bushings # RM-200031-00 are used in place of the bushings in the repair kit if the tow bars in question have a serial number lower than 23240 or 023240.
view full answer... - Replacement Shoulder Bolts and Nuts For Roadmaster Falcon 5250 TowbarThe shoulder bolts for a Roadmaster Falcon 5250 are not available outside of the Roadmaster Repair Kit for Falcon Towbars # RM910003-52. They are also available in the Complete Repair Kit for Roadmaster Falcon Tow Bar 5250 # RM-910003-55.
view full answer... - Replacement Arm Release Buttons for Roadmaster Falcon Tow Bar 5250Yes, the Complete Repair Kit for Roadmaster Falcon Tow Bar 5250 part # RM-910003-55 comes with the components needed to repair the Autowlok system on a Roadmaster Falcon Tow Bar 5250.
view full answer... - Complete Rebuild Kit for Roadmaster Falcon 2 Tow BarSince you have a Falcon 2 tow bar the correct rebuild kit you'd need is the part # RM-910003-60 actually. The part number you mentioned is for the All Terrain model.
view full answer... - Solution for Roadmaster Falcon Tow Bar Where Inner Arm SticksThe solution for your Roadmaster Falcon 5250 tow bar is the Roadmaster Complete Repair Kit # RM-910003-55. I spoke with my contact at Roadmaster and he confirmed that you will want to use the repair kit to replace the components in your tow bar. I have attached the installation instructions to this kit for you. When the tow bar is apart, my contact at Roadmaster said that to clean the tow bar you will want to use a simple degreaser, non-abrasive brush, and only silicone spray. My contact...
view full answer... - Repair Kit Needed for Roadmaster Falcon 5050 Tow BarTo repair your Roadmaster Falcon 5050 tow bar you will need the Complete Repair Kit # RM-910003-55. This comes with everything that you need to repair the lock on your arm as well as doing some routine maintenance on your whole tow bar.
view full answer... - Replacement Hardware for Falcon 5250 Tow BarWe do have replacement hardware for the discontinued Falcon 5250 tow bar, though I'm not 100 percent certain what you are referring to by mounting hardware. If you mean the crossbar assembly then the correct part is the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00. If you were referring to a repair kit then what you need is the Complete Repair Kit for Roadmaster Falcon Tow Bar 5250 # RM-910003-55. Also, keep in mind if the serial...
view full answer... - Bushings for Falcon 5250 Tow Bar With Serial Number Lower Than 232What you need are 2 of the Replacement Bushing for Falcon Tow Bar 5250 - Older Version # RM-200031-00. The repair kit # RM-910003-55 you have will work but since your used tow bar has a serial number lower than 23240 you need 2 replacement bushings that will work with the older model that you now have.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Manda E
Updated by:
Amanda K
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
6/16/2026
Nice! Glad we could help, Gil! ^___^ What vehicle are you towing with your Falcon?