Looking For Replacement For Idler Hub Part 94545
Updated 05/16/2024 | Published 05/15/2024
Products Featured in This Question
Question:
Looking for idler hub replacement kit for 94545. This number is on the backside of the hub.
asked by: Jamie
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Jamie. We definitely should have a hub that you can use as a replacement. I was not able to find any good references for the hub part number 94545 though, so I will need a bit more information from you in order to recommend a replacement.
Specifically, I will need to know the bearing sizes that your hub uses. Your best bet will be to jack up the trailer, pull one of the hubs and remove the bearings. Each bearing will have a number stamped on the edge. It appears to be a 5 lug 5 on 4-1/2" hub which is standard. It might be a standard 3.5K hub like part # AKIHUB-545-35-EZ-K but please do confirm this is what you have. If you can provide me with both the inner and outer bearing numbers I can definitely recommend a replacement. Feel free to post that info in the comments below when you have it.
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44643 / L44643
- Marine Grade
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: trailer hubs and drums
- Search Results: karavan parts
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Shop: DeeMaxx Trailer Idler Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Buddy Bearing Protectors - Model 1781SS - Stainless Steel - Qty 2
- Shop: Rubber Lube Plug - Fits 1.18" Lubed Dust Cap - Qty 1
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Video: Complete Breakdown of the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Q&A: How to Determine Which Replacement Bearings for 1998 EZ Loader Boat Trailer
- Q&A: Pre-Greased Hub Assembly With L44643 Hub Bearings
- Q&A: Recommended Pre-Greased Hub With 1-1/16" Inner And Outer Bearings And 4 On 4 Bolt Pattern
- Q&A: Preassembled Galvanized Trailer Idler Hub w/ a 5 on 4-1/2 and L44643 Bearings
- Q&A: Grease Used in CE Smith Pre-Greased Hub CE13110
- Q&A: What Type of Grease is Recommended with CE Smith Trailer Idler Hub Assembly # CE13515
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer jack
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
on Trailer Hubs and Drums
