Recommended Pre-Greased Hub With 1-1/16" Inner And Outer Bearings And 4 On 4 Bolt Pattern
Question:
I have a inner and outer bearing size of 1 1/16. Will this hub assembly work with bearing #L44649?
asked by: Greg
0
Expert Reply:
The CE Smith Trailer Hub Assembly w/ Carrying Case # CE13110 uses the # L44643 bearings which are designed to be used with a 1" spindle. As you have a 1-1/16" spindle, it will not fit properly. What you will need is the CE Smith Trailer Hub Assembly w/ Carrying Case # CE13109. This uses the # L44649 bearings and will fit much better.
expert reply by:
Lazer S
0
Products Referenced in This Question
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Why Are Wheel Pilot Hole Measurements Taken in Decimals and Not Fractions.
- Q&A: Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
- Q&A: 13 inch Trailer Tire and Wheel Combos with 4 on 4 Bolt Pattern and 2.8 inch Pilot Hole
- Q&A: Diameter of Trailer Idler Hub Assembly for 2,000 lb Axles
- Q&A: What is the Pilot Diameter on a Wheel
- Article: Most Popular Wheel Bearings
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Idler Hubs For Trailer w/Obsolete Spindle 1.255 Inch & 0.775 Inch Bearing Inner Diameter
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: The Differences Between Cam Buckles and Ratchet Straps (And Who Would Win In a Fight)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Stability Control for Heavy Duty Vehicles