How Much Does The Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel # AM73NR Weigh?

Question

Question:

What is the weight of this wheel?

asked by: Alex

0

Expert Reply:

The Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel # AM73NR weighs just 13lbs.

expert reply by: Bud M

0

Answer 1

Hi Eric! The Americana Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel #AM63NR is indeed the same thing as the Americana Aluminum AM03 Series Black Machined Trailer Wheel #AM43NR; just the color is different. They are both 16" x…

view full answer...

Answer 2

Hello Stacey, thanks for reaching out. There is no way to add pictures in the comments on here, but if you want to email those pictures to me I am happy to take a look. Also let me know the diameter of the wheel, or if you can tell me your tire size…

view full answer...

Answer 3

Hi Mark; the Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel #AM73NR uses acorn style lug nuts with a 60° cone like the #12CLN. An ST175/80D13 tire like the #AM1ST77 will fit a 13" x 4-1/2" rim.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

How Much Does The Aluminum AM03 Series Gunmetal Gray Machined Trailer Wheel # AM73NR Weigh?

Product Page this Question was Asked From

Continue Researching