bing tracking image
Customer Service My Orders
  1. Boat Trailer Parts
  2. CE Smith
  3. Winch Stand
  4. Roller Bracket
  5. Galvanized Steel
  6. 13-3/16 Inch Tall
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On
Add to Cart
CE Smith

CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On

Part Number: CE31005PG
518 Reviews | 30 Questions
In Stock
$29.79
 Boat Trailer Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

ce smith boat trailer parts roller bracket
ce smith boat trailer parts bow roller bracket for winch stands - pre-galvanized steel 13-3/16 inch tall bolt on
ce smith boat trailer parts winch stand
ce smith boat trailer parts roller bracket ce31005pg
ce smith boat trailer parts winch stand bow roller bracket for stands - pre-galvanized steel 13-3/16 inch tall bolt on
ce smith boat trailer parts winch stand bow roller bracket for stands - pre-galvanized steel 13-3/16 inch tall bolt on
ce smith boat trailer parts roller bracket

Show All (7) Product Images

Show Fewer Product Images

Customer Photos

CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo
CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On customer photo

Show All (12) Customer Images

Show Fewer Customer Images

Videos

Show All (1) Videos

Show Fewer Videos

Need help with installation?
Locate installers near me
Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer. 1-800-940-8924 to order CE Smith boat trailer parts part number CE31005PG or order online at etrailer.com. Free expert support on all CE Smith products. Great prices and Fastest Shipping for CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On. Boat Trailer Parts reviews from real customers.
  • All Info
  • Reviews (518)
  • Q & A (0)
  • Related Parts
  • Photos

CE Smith Boat Trailer Parts - CE31005PG

  • Winch Stand
  • Roller Bracket
  • Galvanized Steel
  • 13-3/16 Inch Tall
  • CE Smith

Keep your boat's bow away from your winch and in line with it while you are trailering. The bracket accepts any 3" to 4" bow roller or Y-stop. 11-Gauge pre-galvanized steel can be painted to match your trailer.


Features:

  • Heavy-duty bracket holds a bow stop to protect your winch
    • Designed to fit around a 3-1/2" wide winch
    • Can also be mounted alone on winch stand
    • Accepts 3" - 4" bow roller or Y-stop
  • Bolt-on installation
    • Does not include mounting hardware
  • Sturdy, 11-gauge pre-galvanized steel construction
    • Can be primed and painted to provide even more resistance to corrosion and to match your trailer's paint finish
  • Made in the USA


Specs:

  • Quantity: 1 bracket
  • Dimensions:
    • Height: 13-3/16"
    • Inside width: 3-11/16"
    • Outside width: 3-15/16"


Typically found on winch stands mounted on trailer tongues, bow roller brackets position a bow roller or Y-stop in front of the winch to prevent the boat's bow from making contact with the winch.


Pre-Galvanized Steel

Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The edges of the pre-galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating (less than 1 mil) and the fact that the edges remain exposed, pre-galvanized parts can begin to oxidize and rust quickly, so it's recommended that they be primed and painted.



31005PG 11-Gauge Pre-Galvanized Steel Replacement Bow Roller Bracket for Winch Stands by CE Smith - 13-3/16" Tall







Customers Who Purchased This Boat Trailer Parts Also Bought...



Customer Satisfaction Score:

Ratings & Reviews

4.8

518 reviews
5 Stars
(442)
4 Stars
(52)
3 Stars
(11)
2 Stars
(4)
1 Star
(9)
Review Sort Icon
by:
I like it it's going to work perfect for the application that I need
Customer Large Image
Customer Image
Click to Enlarge
Jerred H. profile picture
Etrailer Expert

Jerred H.

9/23/2026

That's awesome Robert! Glad the new bracket is going to work so well for you. Thanks for sending in that pic.

by:
It was exactly what I needed and came in a reasonable time
Alex was excellent with his communication and follow up to see if I received it.
Customer Large Image
Customer Image
Click to Enlarge
Claire H. profile picture
Etrailer Expert

Claire H.

7/6/2026

It looks perfect! Thank you for the kind review :)

by:
This product is described as “ Pre-Galvanized Steel”. This product was installed on my trailer and sat in the garage without use for three months after I prototype. It rusted significantly and the finish came off. Etrailer refused to take it back. I called CE Smith and they sent me a new one. It did not rust as bad as the first one. I ended up sanding and painting it. I only use the product in fresh water and it is stored in my garage. Make sure to inspect this product when you get it and keep an eye on it.
by:
Worked well for my 1200cc jetski trailer. I felt that it could be stronger for the angle at which I was forced to mount it, but as long as I do not overload it there have been no issues.
by:
Great price, quick shipping and web site is very easy to navigate. I will let my friends and family know of you guys.
Thanks Mike
by:
Great for PWCs and fishing boats but probably a bit lightweight for larger boats. Works well on my Sea Doo trailer. I was going to make my own, but for what I could buy the material for, I was able to buy two of these. Bottom line, I'd buy these again for what I'm using them for.
Customer Large Image
Customer Image
Click to Enlarge
Chad P. profile picture

Chad P.

8/7/2018

Still working great after a year! Theres no rust or deflection in the bracket. Sure was a lot easier than making my own!

by:
A little flimsy. I have a light boat (14 ft V)but don’t recommend for anything heavier.
by:
The product is good. It’s just a little long for my purposes so I’m gonna cut it down, but it is good quality.
by:
Sturdy and a perfect fit for my vintage Ez Loader trailer. Delivery was better than promised.
Robert profile picture

Robert

6/2/2025

Pretty well. The galvanizing is beginning to show some rust on the top edge, but the flat faces are rust free. I will probably touch it up with some cold galvanizing.

by:
Perfect, just what we needed. Easily installed and super fast shipping! Thanks!
Customer Large Image
Customer Image
Click to Enlarge
by:
Exactly what I needed. Worked perfectly!
by:
I have a very small bow stop on a 22' ocean going cruiser I just purchased and needed a more substantial bow stop, I found just what I needed and I am very pleased with the results.
Customer Large Image
Customer Image
Click to Enlarge
by:
Exactly what I needed.
by:
I used the CE Smith Bow Roller Bracket in setting up a winch system on my Kayak trailer, it worked great for what I needed.
by:
Work prefect, the size is great for crank handle,and is strong
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
You all did a Great JOB! I am very happy with the entire purchade process. The item is exactly what I needed. Thank you for everything!!
by:
This bracket worked out perfectly for my installation. I mounted it below the winch for two reasons: it is too narrow for the winch I already had, and the bow stop needed to be positioned below the winch attachment point on the boat (the front boat handle).
Kenneth profile picture

Kenneth

1/26/2018

All working well, thanks.

by:
I bought this bow roller mounting bracket to replace an older bracket that did not fit my new set-up. The new bracket fits perfectly. It was delivered well ahead of the projected delivery date.
Bill G. profile picture

Bill G.

2/17/2019

The bracket seems to be working fine. No problems

by:
I have a 35+ plus year old shorelander boat trailer. I had recently purchased a 12 foot tracker flat bottom Jon boat. The problem I had was trying to fit my new tracker flat front boat to my old bow stop. My old bow stop is V shaped. I found a bow stop from etrailer for flat front Jon boats but it did not fit the bracket on my old trailer. I did a little research on this site and found the perfect solution. The solution was a wider mounting bracket to hold the new bow stop. The bow stop is a Yates 3 inch wide. My old bow stop was a Yates 2 inch V. The bracket is very universal for older trailers. etrailer is the only company I could find that offered this product. The prices are great and the shipping is good. I have also purchased new axle mounting plates and leaf spring bushings from here for the same trailer and they fit like a glove. The axle mounting plates and bushings are made by the same people as the bow stop bracket which is CE Smith. Thank you etrailer! I will be a continued customer!
by:
perfect,just what i needed
by:
My trailer came without a bow roller. The parts I ordered were just what I needed to add that to my trailer. Fast delivery and good price. Web site was good also.
Patrick L. profile picture

Patrick L.

3/18/2020

Great

by:
Perfect fit.
Customer Large Image
Customer Image
Click to Enlarge
by:
A good quality item arrived in timely fashion and is doing exactly what it is supposed to, supporting the bow of my boat from the winch post
Geoffrey profile picture

Geoffrey

6/27/2022

Awesome 100

by:
Worked great for what I needed.
Customer Large Image
Customer Image
Click to Enlarge
by:
Used this for the bow roller for a 12' aluminum boat. This works well, but at higher freeway speeds, this allows swaying of the bow. It could use a little more stiffness.
25
518
true
Show More Reviews

See what our Experts say about this CE Smith Boat Trailer Parts

Do you have a question about this Boat Trailer Part?
  • Trailer Mounted Bracket for a Bow Stop for Jon Boat
    You could use a bracket such as # CE31005PG for bow stop # YRJONBLOCK. A lot of trailers use this type of bracket for bow stops. I have also included a link to all of the brackets we carry.
    view full answer...
  • Boat Trailer Winch to Fit with CE Smith Bow Roller Bracket for Winch Stands
    Hey Tanner, thanks for reaching out! I don't have a record on what winch appeared in the photos we took of the CE Smith Bow Roller Bracket for Winch Stands # CE31005PG, but I looked at the dimensions of the bracket and I was able to find that the Buyers Products Trailer Hand Winch - 800 lbs # 337HW800S will fit inside the bracket just fine. As long as this can handle the weight of your boat you'll be good to go! If this can't handle the weight of your boat please let me know and I'll...
    view full answer...
  • 3-1/2 Inch Wide Trailer Boat Winch For Use With Bow Roller Bracket
    Hey Scott, We do have a trailer winch with the 3-1/2" wide measurement you need to go with the CE Smith Bow Roller Bracket # CE31005PG. What you can use with this is the Fulton Single Speed Trailer Winch # F142102. This has an 1,100 lb capacity and even includes a 20 foot strap like you were wanting.
    view full answer...
  • How To Replace a Knot Autoflex Winch and Bow Roller Assembly On a Boat Trailer
    I do have a solution for you but we don't offer any integrated winch and bow roller setups like the Knot Autoflex. Therefore, you'd have to purchase a winch stand assembly like the CE Smith Winch Stand part # CE31013G which bolts onto the tongue and allows you to mount a winch like the Fulton F2 Fully Enclosed Trailer Winch part # FW20000301 and bow roller like the Bow Roller Assembly part # YR300B-325B when using the CE Smith Bow Roller Bracket for Winch Stands part # CE31005PG. You may...
    view full answer...
    Image 1 for
  • Looking for a Replacement Handle for a Knott Autoflex Hand Winch
    If you were looking for a replacement handle, the hole opening on the Replacement Quick Attach Winch Handle for Dutton Lainson Winch - 9-1/2" # DL70330 will measure 15/32" by 5/8" and looks like it will be a good replacement for your Knott Autoflex winch. I do suggest measuring to confirm this though. However, if you are referring to the shaft/handle to change from one speed to the other, you will need to contact Knott directly. This is not a winch we carry so I cannot say if any of our...
    view full answer...
    Image 1 for Image 2 for
  • Replacement for Knott 6S5810.001 AutoFlex 2500 lb 2-Speed Trailer Winch
    We don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part # 315-W2500D • Winch Stand, part # CE31013G which is compatible with 2 inch wide pole tongues • Bow Roller Bracket, part # CE31005PG • 3 Inch Bow Roller, part # YR300B-325B
    view full answer...
    Image 1 for
  • Bow Roller and Mounting Bracket Recommendations for Boat Trailer
    The best part about boat trailers is that everything is universal so a lot of the parts you add to them are about preference and have to do with the type of boat you're carrying. I recommend checking out the CE Smith Bow Roller Assembly with Bells for 3" Wide Bracket # CE29334 and pairing that with the CE Smith Bow Roller Bracket for Winch Stands # CE31005PG. This is a pretty standard size for a bow roller and it comes with hardware to mount to the bracket that, in turn, mounts to your...
    view full answer...
    Image 1 for
  • Recommended Flat Bow Stop for Tracker Trail Star Trailer
    I am not familiar with the exact bow stop you have pictured but we do carry a few options such as the Yates Flat Bow Stop for Boat Trailers part # YRJONBLOCK which is what I recommend using. It's designed to be used with a bracket such as the CE Smith Bow Roller Bracket part # CE31005PG. The bracket may require some modifying for your specific setup.
    view full answer...
    Image 1 for
  • Using Two Bow Stops on Either Side of a Boat Trailer Winch
    This trailer was either set up this way by the manufacturer or the owners had to fabricate some extensions and then attach brackets and the stops to make this set up. Extensions would have to be fabricated by a machine shop or a welder and then you could use a bracket such as # CE31005PG with jon block # YRJONBLOCK.
    view full answer...
    Image 1 for
  • Replacing Bow Strap and Winch Mount on on Older Shoreline Sailboat Trailer
    That's a really interesting setup. We aren't really going to be able to help much if you want to use that winch mount in it's current configuration. If you could instead mount the winch like in the picture I attached you could then go with a different bow roller possibly. You'd be able to use the bow roller part # YR450Y-400Y you mentioned as well as the bracket part # CE31005PG.
    view full answer...
    Image 1 for Image 2 for
  • All Parts Needed To Add A Winch To A Kayak Trailer
    I included a winch that will be very comparable to what comes on the CE Smith Multi Sport Plus Boat and Kayak Trailer # CE48870, but we do not have that exact model. I should also mention that there is no hardware included in this list, but everything else is. CE Smith Bow Roller Bracket for Winch Stands # CE31005PG CE Smith Winch Stand # CE31013G Yates Bow Roller - 3" Long - 1/2" Shaft # YR3143-4 Fulton Single Speed Trailer Winch - 7" Long Handle, 12' Strap - 900 lbs # F142007
    view full answer...
  • Winch Post Setup and Winch Recommendation for 2000 Four Winns Vista
    Typically the bow eye/hook will sit just below the roller stop. In addition to making for an easier retrieval, having the bow eye below the roller also provides a safety measure. The potential danger of your current setup is that in the event of an accident on the road there's nothing keeping the boat from launching up that roller and into the back of your tow vehicle. If you have the bow stop above the eye/hook (with the winch strap below it) the bow can't get over the stop. We currently...
    view full answer...
    Image 1 for
  • Dimensions of Bolt Holes on CE Smith Bow Roller Bracket for Winch Stands # CE31005PG
    The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, # CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part # CE10700A. The bolt through hole size for the winch shaft bolt is .75 inch diameter. I have included a diagram that shows the dimensions of the bolt holes for the bracket.
    view full answer...
    Image 1 for
  • Can Fulton F2 Fit with Dutton-Lainson Angle Mounting Plate
    Yes, the following parts can be used together: - Dutton-Lainson Angle Mounting Plate # DL24059 - Fulton F2 Fully Enclosed Trailer Winch # FW16000101 - CE Smith Winch Stand # CE31013G - CE Smith Bow Roller Bracket for Winch Stands # CE31005PG The mounting holes for the Fulton F2 are a little wider than what comes on the mounting plate though so you'll have to modify the mounting plate to make it fit. The Adapter # DL24055 won't make it fit any better. We don't have any other winch...
    view full answer...
  • Can Y-Shaped Bow Stop Be Replaced with Bow Roller On Boat Trailer
    If you are referring to a bow stop such as the Yates Y-Style Bow Stop for Boat Trailers part # YR7Y44-4 then yes you can replace this with a bow roller such as the Bow Roller Assembly part # YR450Y-400Y which won't mark the boat. This can then be used with the CE Smith Bow Roller Bracket for Winch Stands part # CE31005PG or you can match one to fit the bracket you have now from the list below.
    view full answer...
  • Recommended Winch for a 1986 ski Nautique 2001 Boat and DHL Trailer
    For your 1986 ski Nautique 2001, I recommend the Dutton-Lainson Hand Winch item # DL15440. It looks like your boat weighs 2,400 lbs dry and is almost 19' long so this 2-speed 3,200 lbs winch would work perfect. I'm not sure if you're using carpeted bunks or roller bunks but the item # DL15440 has plenty of capacity to work with both. You'll also need the Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. item # DL24242. We do not have a complete rubber bumper assembly....
    view full answer...
  • Winch that Could Fit in CE Smith Bow Roller Bracket # CE31005PG
    The inside width of the CE Smith Bow Roller Bracket # CE31005PG has an internal width of 3-11/16 inches so for a winch that is narrow enough to fit inside that we have the # DL16001 which measures 3-3/16 inches in width.
    view full answer...
  • Parts Found In Pictures for CE Smith Bow Roller Bracket # CE31005PG
    The Fulton Single Speed Winch # F142306 appears to be the closest winch that we have to the one in the picture with the CE Smith Bow Roller Bracket for Winch Stands # CE31005PG. It has a similar mount and frame connection with the crank handle and switch in similar positions. I cannot tell you exactly what winch was used for this photo as it is a manufacturer image and likely the winch may no longer be in production. This winch has 1,800lb capacity and includes a 20' strap with 9" handle....
    view full answer...
    Image 1 for
  • Recommended Bow Roller Bracket for 4 Inch Wide Winch
    The closest bow roller bracket for winch stands that we have to the dimensions you listed is the CE Smith # CE31005PG. This bracket is 13-3/16" tall and is designed to fit around a 3-1/2" wide winch. We do not currently offer any brackets that are designed to fit around a 4 inch wide winch. I have also included a link that takes you to our selection of brackets for you to look at.
    view full answer...
  • Mounting Bracket And Y-Stop Needed For A Boat Trailer With A V Hull Boat
    Hey Steve, We currently offer the CE Smith Bow Roller Bracket # CE31005PG, which bolts onto a 3-1/2" wide winch stand and would allow you to mount a Boat Trailer Rubber Y-Stop # DL21732.
    view full answer...
  • Replacement Bow Roller Brackets for Boat Trailer
    While we don't have any specific replacements for your boat trailer we do have bow roller brackets that you may be able to use. For example, the CE Smith Bow Roller Bracket # CE31005PG with the Yates Bow Roller for Boat Trailers - Heavy-Duty Rubber # YR4174-4 and Roller Shaft with Pal Nuts for Boat Trailer Rollers # CE10700A. I have added links to video reviews of these parts as well as links to our entire selection of brackets for you to look through.
    view full answer...
    Image 1 for
  • Replacement Bow Roller Bracket, Shaft and Roller
    We don't have any bow rollers that will fit a roller larger than 1/2 inch in diameter so the best recommendation I could make would be to replace your current setup with something like the part # CE31005PG for a bracket, part # CE10700A for a new roller shaft, and then part # YR300Y for a roller.
    view full answer...
  • Bow Stop, Bracket, and Shaft Recommendations for a Boat Trailer
    You will need a bracket that has a 3/8 inch diameter shaft. At this time we do not offer a 3/8 inch diameter shaft. I recommend bow stop # YR7Y44-4 used with bracket # CE31005PG and shaft # CE10700A for your bow stop set up.
    view full answer...
  • Diameter of Hole for Mounting Shaft of # CE31005PG
    The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, # CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part # CE10700A.
    view full answer...
    Image 1 for


< Previous
12
Next >



Do you have a question about this Boat Trailer Part?


Info for this part was:

Employee Joe V
Installed by:
Joe V
Employee Jeff D
Installed by:
Jeff D
Employee Andrew K
Video by:
Andrew K
Employee Jameson C
Expert Research:
Jameson C
Employee David L
Written by:
David L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.