Front Hitch for 2020 Ram 2500 Power Wagon

Question

Question:

Need a front 2 inch receiver for a 2020 Power Wagon. Suggestions?

asked by: Allan S

0

Expert Reply:

This is an easy decision to make since the Curt Front Mount Trailer Hitch # C73ZV is the only model that is compatible with the Power Wagon trim. The only exception is if you have a diesel but it looks like the Power Wagon comes with a Hemi V8 so that shouldn't be an issue. The hitch has a bolt-on installation, gross trailer weight of 5,000 lbs, line pull of 9,000 lbs, and a 500 lb vertical load.

expert reply by: Robin H

0

Answer 1

Hey Neal, we have confirmed with Curt in the past that the front hitch part #C73ZV is confirmed to fit your 2022 Ram 2500 Power Wagon. What are you planning on putting in the front hitch?

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 8

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 9

Hello Kenneth, Welcome to etrailer! I'm glad you found us. Thanks for getting that additional information to me. Since you only need a 2" drop to get your carrier to clear your tailgate, these are your best options: If you only need to go…

view full answer...

Answer 10

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Front Hitch for 2020 Ram 2500 Power Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching