Do You Carry a Grease Seal With 2-1/4" ID and 3-1/8" OD?
Published 04/05/2024
Products Featured in This Question
Question:
Looking for a grease seal, 3 1/8OD x 2 1/4 ID for a EWC Q563 ag hub.
asked by: Dale
1
Helpful Expert Reply:
Currently we jump from the Seal # SL226 which has the 2.25" ID but a 3.066" OD to the Seal # GS-2250DL you found with a 2.25" ID and a 3.376" OD. We do not have a seal with a 3-1/8" OD. If you are unable to find the correct seal you may be able to have a sleeve machined which will allow you to use the # SL226 seal.
expert reply by:
Bud M
1
Product Page this Question was Asked From
Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.25 Inch I.D.
- 3.38 Inch O.D.
- TruRyde
more information >
Continue Researching
- Q&A: Timken Double Lip Grease Seal To Replace Grease Seal # GS-2250DL
- Q&A: Replacement Grease Seal for 5,100 Terran Axle
- Article: Most Popular Wheel Bearings
- Q&A: Can Kodiak Disc Brake Kit # KOD53FR be Converted to Oil Bath
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended MORryde Suspension Upgrade Kit for Tandem Axle Trailers w/ 3-1/8" Long Shackle Straps
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 6,000 lb Dexter Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: 7 Common Questions Everyone Has About Trailer Tires