Recommended Trailer Wiring Harness for a 2011 Honda Pilot

Question

Question:

Hi there, My 2011 Honda pilot has a hitch installed but no wiring harness. Do you guys have that? I know I got one from you for my 2008 Honda pilot that I installed but I can’t find it for my 2011 pilot.

asked by: Trevon

0

Expert Reply:

Hey Trevon, it looks like we do have some wiring for your 2011 Honda Pilot. I recommend checking out the Hopkins Plug-In Simple Wiring Harness for Factory Tow Package # HM11143104.

This harness plugs into the connection point behind your rear bumper and will provide you with a 4 way at the back of your vehicle.

expert reply by: Bryce D

0

Trevon

4/2/2024

Thank you, Bryce. Do you have a 4 way and 7 way dual package or just a 4 way?

Bryce D.

4/3/2024

@Trevon Unfortunately just the 4 way for your vehicle. You can add a 7 way with # ETBC7, but they aren't packaged.

Trevon

4/3/2024

@BryceD thank you. Is there video instructions on how to install it or does it come with paper instructions?

Bryce D.

4/4/2024

@Trevon We do have some videos, and there will be instructions that come with it but there are no videos that we have for your 2011 Pilot. I did find one for a 2007 Honda Pilot that I've linked for you to check out.

Helpful Links

tv-install-brake-controller-2007-honda-pilot-etbc7.aspx

See All (7) Replies to Trevon ∨

Answer 1

For your 2011 Honda Pilot the 4-way trailer wiring harness you'd want is the Hopkins kit part #HM11143104 which installs very easily to factory wiring of the vehicle.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Kelly! The Curt 13146 fits 2016 - 2022 Honda Pilot. What you need for your 2026 Honda Pilot is the Curt #C22HR. This has a bolt-on installation and does not require any cutting or trimming of the bumper so you won't be modifying the vehicle.…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Trailer Wiring Harness for a 2011 Honda Pilot

Continue Researching