Replacement Sink Drain And How To Determine The Correct Sizing

Question

Question:

Will this fit a 2inch drain hole? That is the size of the opening in my RV sink.

asked by: Joshua

0

Expert Reply:

Hi Joshua,

The Valterra Threaded RV Sink Drain # A01-2012VP is designed to fit 1-3/4" diameter drains. You can more easily measure the drain hole from the bottom of the sink, but you might need to untighten the nut for the drain in order get an exact measurement. If you do end up having a 2" drain you can use a sink drain like part # 37295325.

expert reply by: Kevin C

0

Joshua

3/25/2024

Hi Kevin, Thank you for the quick reply. Do you have a drain trap for the 2" drain you linked above? Mine currently has a trap that looks like this one: https://www.etrailer.com/RV-Sewer-Hose-Fittings/JR-Products/37295195.html

Kevin C.

3/25/2024

@Joshua The traps we offer like part # 37295195 are designed to run directly to an exterior drain line, usually just a 3/4" diameter garden hose. Your sink should have a P-Trap like part # LSB76XR to prevent smells from the plumbing lines from coming up out of the drain. The # 37295325 is designed to run to a 1-1/2" drain pipe and connect to a P-Trap with a 1-1/2" opening like the # LSB76XR.

Answer 1

The Camco RV Drain Trap #CAM37262 or #CAM37420 is designed to be used with a 1-1/2 inch - 11.5 threaded drain fitting. I recommend the Valterra Sink Drain with Strainer Basket #A01-2011VP or the LaSalle Bristol RV Drain with Strainer Basket - Metal -…

view full answer...

Answer 2

Yes, the Valterra Shower Drain, #A01-2012VP does come with a gasket. It fits a 1-3/4" drain hole with1-1/2" P-traps. The stem is 1-1/2" in length and threaded the full length.

view full answer...

Answer 3

Yes, the Valterra 90 Degree Drain Elbow #RF890 will fit into the 1-1/2" Valterra Shower Drain #A01-2012VP.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Sink Drain And How To Determine The Correct Sizing

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching