How Does Prodigy P2 Brake Controller Install on 2022 Ford F-53 Motorhome Chassis

Question

Question:

Im upgrading my class A motorhome from a 2012 on the Ford F53 chassis with factory tow package to a 2023 class A on the newer Ford F53 chassis with factory tow package. Question: Will my old prodigy p2 trailer brake control harness work on the newer chassis? The harness has # 16262 and a bar code # 6505357973. Im towing an enclosed 2 axle car trailer. I havent picked up the new RV so I havent been able to get under the dash yet. Thanks, Jim

asked by: Jim M

0

Expert Reply:

Hey Jim, so there is a brake controller plug in harness on your 2022 Ford F-53 motorhome that you can use to install the P2 part # 90885 that you have but we don't have a plug-in style adapter for it. So what you'll have to do is cut off the harness on the motorhome as well as the connector on the brake controller harness and hardwire the two together.

expert reply by: Jameson C

0

F-53 Brake Controller Port
(click to enlarge)

Jim M.

3/18/2024

Ok thanks for the info. I really don't want to do a lot of cutting and splicing under the dash. I think I need to update the brake controller to something that can just plug into the F53 wiring harness connector. What would you recommend for towing my 2 axle car trailer? Thanks again for your help, Jim

Jameson C.

3/18/2024

@JimM We don't have access to a brake controller harness that would plug right into your RV at this time. I am not sure if there will be one that is released though since it's been a couple years now that the RV has had that design. If I were you I would wire the P2 to the harness. If you need a new harness you could use the part # 7894 or you could cut off the one you have now.

Answer 1

I will be happy to compare the Tekonsha P3 #90195 and the Primus #TK90160 for you. First, I will cover features that both controllers share. Both controllers: Will install the same in your vehicle Come with a universal pigtail Are proportional…

view full answer...

Answer 2

According to Tekonsha who makes the brake controller install harness part #TK78VR that fits your 2022 Hyundai Palisade the brake controller install harness is behind the drivers side kick panel near where you left foot would be if you were driving.…

view full answer...

Answer 3

To add a 7-way and brake controller to youd 2018 Ford F-150 that doesn't have the factory tow package you'll need to start with a 4-way (if you do not have one). For that you would want the #HM11140735. From there you would need to convert…

view full answer...

Answer 4

If your 2019 Ford F-150 did not come from the factory with a 7 Way on the back of the vehicle, the needed power wire and brake signal wires may actually be there, but are not connected to the factory port. They can also be pretty hard to get at as…

view full answer...

Answer 5

To help you determine which wiring harness will work on your 2016 Ford F-150 you can look for the connector that's under the truck's bumper. If the connector is round and looks like it will match up with picture #1 that I've attached then…

view full answer...

Answer 6

Hey Bill, yes you can install the Prodigy P2 brake controller part #90885 in your 2014 Ford F-150 with a factory 7-way without requiring any hardwiring. For that all you need is the part #22292 which plugs into the truck in a port under the dash.

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

To install a brake controller on your 2017 Ford F-150 w/ factory tow package and 4-way connector, you will need to install Adapter 4 Pole to 7 Pole, part #37185. You will need to run 2 wires, to the front of the truck, the Black wire for 12 volt…

view full answer...

Answer 9

Yes, you can install the Tekonsha Prodigy P2 Trailer Brake Controller part #90885 from your 2001 Ford F-150 on your 2018 Ford F-150 you just need an adapter, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #22292.If you…

view full answer...

Answer 10

I did some digging and I cannot find any info on if there is a brake controller port under the dash of your truck. Doesn't mean there isn't one but I can't find any info on it or any other year F-650 as well. I'd be inclined to…

view full answer...

Answer 11

Since the 2019 Ford F-150 doesn't have any trailer wiring you'd need to first start with a 4-way with part #18252 and then use a 7-way adapter part #37185 and you'd be set. If the trailer has brakes instead you'd need the #ETBC7 for…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

How Does Prodigy P2 Brake Controller Install on 2022 Ford F-53 Motorhome Chassis

Continue Researching