Where is Brake Controller Install Harness on 2022 Hyundai Palisade

Question

Question:

I have a 2022 Hyundai palisade equipped with trailer towing package and wiring. My question is “where is the location of the wire near the dashboard to connect the brake controller”. I have contacted Hyundai service department and parts department at the dealer. I have also contacted the headquarters of Hyundai customer Service. No one was able to tell me exactly where the trailer brake controller Connector or wiring are located.

asked by: Jack K

0

Expert Reply:

According to Tekonsha who makes the brake controller install harness part # TK78VR that fits your 2022 Hyundai Palisade the brake controller install harness is behind the drivers side kick panel near where you left foot would be if you were driving. There will be a 4-pin connector that mates with the brake controller harness taped to another harness.

For a brake controller the P2 part # 90885 is widely considered to be one of the best brake controller due to how well it performs and how reliable it is. It uses an inertia sensor that detects how hard you are applying the vehicle brakes and applies the trailer brakes with same intensity.

expert reply by: Jameson C

0

Answer 1

Your 2021 Hyundai Palisade has brake controller wiring that runs from the port under the dash back to the plug that the Curt 7-way kit part #C68JR plugs into. That is why this kit that fits your vehicle does not have any wiring that runs from the…

view full answer...

Answer 2

The Redarc Tow-Pro Liberty Brake Controller, #RED24FR installed using the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers, #RED69FR will draw its power from from the black wire on your 7-way RV plug and directly to the negative…

view full answer...

Answer 3

Welcome back! It looks like your 2021 Palisade has the Stealth Hitch w/ Towing Kit item #391HYUNPALIS19T. Already having the 7-way connector gives you plenty of options. The best brake controller is going to be the Redarc Tow-Pro Liberty item…

view full answer...

Answer 4

The correct mounting harness for the Prodigy P2 part #90885 for your 2021 Ford F-150 is the part #22292. Your vehicle does not require any special mounting brackets beyond what the controller came with. For a replacement bracket you'd want the…

view full answer...

Answer 5

Hey Bill, yes you can install the Prodigy P2 brake controller part #90885 in your 2014 Ford F-150 with a factory 7-way without requiring any hardwiring. For that all you need is the part #22292 which plugs into the truck in a port under the dash.

view full answer...

Answer 6

The appropriate parts you need to transfer the Tekonsha Prodigy P2 #90885 to your 2019 Ford F-150 depend on if you have a factory 4-pole plug or a factory 7-way plug already installed. If you have a factory 4-way, you will need the following parts: -…

view full answer...

Answer 7

To help you determine which wiring harness will work on your 2016 Ford F-150 you can look for the connector that's under the truck's bumper. If the connector is round and looks like it will match up with picture #1 that I've attached then…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If your 2019 Ford F-150 did not come from the factory with a 7 Way on the back of the vehicle, the needed power wire and brake signal wires may actually be there, but are not connected to the factory port. They can also be pretty hard to get at as…

view full answer...

Answer 10

Yes, you can install the Tekonsha Prodigy P2 Trailer Brake Controller part #90885 from your 2001 Ford F-150 on your 2018 Ford F-150 you just need an adapter, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #22292.If you…

view full answer...

Answer 11

Since the 2019 Ford F-150 doesn't have any trailer wiring you'd need to first start with a 4-way with part #18252 and then use a 7-way adapter part #37185 and you'd be set. If the trailer has brakes instead you'd need the #ETBC7 for…

view full answer...

Answer 12

I did some digging and I cannot find any info on if there is a brake controller port under the dash of your truck. Doesn't mean there isn't one but I can't find any info on it or any other year F-650 as well. I'd be inclined to…

view full answer...

Where is Brake Controller Install Harness on 2022 Hyundai Palisade

Continue Researching