What Wiring Harness do I Need to Install the Tekonsha Prodigy P2 Brake Controller on My 2019 F-150?

Question

Question:

Hi. I have a Prodigy P2 that Im moving to an F-150 2019 with the 2.7 ecoboost. Can you tell me what product number for the appropriate wiring harness for this truck? Any other info about the truck you need to know? Thanks!

asked by: Tim B

0

Expert Reply:

The appropriate parts you need to transfer the Tekonsha Prodigy P2 # 90885 to your 2019 Ford F-150 depend on if you have a factory 4-pole plug or a factory 7-way plug already installed. If you have a factory 4-way, you will need the following parts:

- Tekonsha Plug-In for Brake Controllers # 22292
- T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118283

If you have a 7-way installed, you will need only the following part:

- Tekonsha Plug-In for Brake Controllers # 22292

With both of these routes, you will be able to use your Prodigy P2 on your 2019 Ford F-150.

expert reply by: Bob C

0

Answer 1

The biggest differences between the Prodigy P2 brake controller, #90885, and the P3 brake controller, #90195, are the display, buttons and look of the controllers. I like the buttons and display on the P3 controller myself because the display uses…

view full answer...

Answer 2

Yes, you can install the Tekonsha Prodigy P2 Trailer Brake Controller part #90885 from your 2001 Ford F-150 on your 2018 Ford F-150 you just need an adapter, the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part #22292.If you…

view full answer...

Answer 3

The correct mounting harness for the Prodigy P2 part #90885 for your 2021 Ford F-150 is the part #22292. Your vehicle does not require any special mounting brackets beyond what the controller came with. For a replacement bracket you'd want the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Since the 2019 Ford F-150 doesn't have any trailer wiring you'd need to first start with a 4-way with part #18252 and then use a 7-way adapter part #37185 and you'd be set. If the trailer has brakes instead you'd need the #ETBC7 for…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

I did some digging and I cannot find any info on if there is a brake controller port under the dash of your truck. Doesn't mean there isn't one but I can't find any info on it or any other year F-650 as well. I'd be inclined to…

view full answer...

Answer 8

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 9

You can install your Prodigy P2 trailer brake controller #90885 in your 2018 Ford F-150 using wiring adapter part #3034-P. BUT.....yes, I have to give you one of those...on some of the early production 2018 F-150s Ford omitted the fuse and fuse…

view full answer...

Answer 10

If your 2019 Ford F-150 did not come from the factory with a 7 Way on the back of the vehicle, the needed power wire and brake signal wires may actually be there, but are not connected to the factory port. They can also be pretty hard to get at as…

view full answer...

Answer 11

You can check under the rear bumper of your 2015 Ford F-150 to see if a hitch receiver is installed to the truck frame. Usually a factory-installed hitch will be accompanied by a factory trailer wiring connector like #HM40975. If there is a hitch but…

view full answer...

Answer 12

To install a brake controller on your 2017 Ford F-150 w/ factory tow package and 4-way connector, you will need to install Adapter 4 Pole to 7 Pole, part #37185. You will need to run 2 wires, to the front of the truck, the Black wire for 12 volt…

view full answer...

What Wiring Harness do I Need to Install the Tekonsha Prodigy P2 Brake Controller on My 2019 F-150?

Featured Help Information

Miscellaneous Media

Continue Researching