Can Prodigy P2 Brake Controller Install in 2014 Ford F-150 with 7-Way without Requiring Hardwiring

Question

Question:

With the Prodigy P 2 Brake Controller 990885 can you install it without any external wiring if you have the factory installed 7 pin connector . The video doesnt exactly say that you do or dont. Thanks.

asked by: Bill

0

Expert Reply:

Hey Bill, yes you can install the Prodigy P2 brake controller part # 90885 in your 2014 Ford F-150 with a factory 7-way without requiring any hardwiring. For that all you need is the part # 22292 which plugs into the truck in a port under the dash.

expert reply by: Jameson C

0

Answer 1

The appropriate parts you need to transfer the Tekonsha Prodigy P2 #90885 to your 2019 Ford F-150 depend on if you have a factory 4-pole plug or a factory 7-way plug already installed. If you have a factory 4-way, you will need the following parts: -…

view full answer...

Answer 2

The biggest differences between the Prodigy P2 brake controller, #90885, and the P3 brake controller, #90195, are the display, buttons and look of the controllers. I like the buttons and display on the P3 controller myself because the display uses…

view full answer...

Answer 3

To install a brake controller on your 2017 Ford F-150 w/ factory tow package and 4-way connector, you will need to install Adapter 4 Pole to 7 Pole, part #37185. You will need to run 2 wires, to the front of the truck, the Black wire for 12 volt…

view full answer...

Answer 4

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 5

You can check under the rear bumper of your 2015 Ford F-150 to see if a hitch receiver is installed to the truck frame. Usually a factory-installed hitch will be accompanied by a factory trailer wiring connector like #HM40975. If there is a hitch but…

view full answer...

Answer 6

I did some digging and I cannot find any info on if there is a brake controller port under the dash of your truck. Doesn't mean there isn't one but I can't find any info on it or any other year F-650 as well. I'd be inclined to…

view full answer...

Answer 7

To add a 7-way and brake controller to youd 2018 Ford F-150 that doesn't have the factory tow package you'll need to start with a 4-way (if you do not have one). For that you would want the #HM11140735. From there you would need to convert…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Hey Jim, so there is a brake controller plug in harness on your 2022 Ford F-53 motorhome that you can use to install the P2 part #90885 that you have but we don't have a plug-in style adapter for it. So what you'll have to do is cut off the…

view full answer...

Answer 10

To help you determine which wiring harness will work on your 2016 Ford F-150 you can look for the connector that's under the truck's bumper. If the connector is round and looks like it will match up with picture #1 that I've attached then…

view full answer...

Answer 11

According to Tekonsha who makes the brake controller install harness part #TK78VR that fits your 2022 Hyundai Palisade the brake controller install harness is behind the drivers side kick panel near where you left foot would be if you were driving.…

view full answer...

Answer 12

If your 2019 Ford F-150 did not come from the factory with a 7 Way on the back of the vehicle, the needed power wire and brake signal wires may actually be there, but are not connected to the factory port. They can also be pretty hard to get at as…

view full answer...

Can Prodigy P2 Brake Controller Install in 2014 Ford F-150 with 7-Way without Requiring Hardwiring

Continue Researching