Replacement Adjustment Pin and Lock Sets For B&W Tow and Stow 3-Ball Hitch System

Question

Question:

I have a tow and stow three ball hitch. Some stole one of the pins that go on the adjustment column. How can l buy a replacement?

asked by: Ken S

0

Expert Reply:

We do have the Replacement Adjustment Pin # BWTS35010 but you should consider one of the InfiniteRule locking pin set. There is the Set # 34061775-D for 10K and 14.5K systems or Set # IR29FR for a 21K system.

expert reply by: Bud M

0

Answer 1

There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…

view full answer...

Answer 2

The ball on the B&W Tow & Stow 3-Ball Mount #BWTS30049B is only designed to rotate inside the mount. There is a snap ring which keeps the ball inside the mount when you remove the pin. So while the balls can be removed it would take a bit of…

view full answer...

Answer 3

To lock your B&W Tow & Stow 3-Ball Mount #BWTS30049B to your truck you actually only need one single locking hitch pin and for that I recommended checking out the InfiniteRule Hitch Lock #34061073-D which is a stainless steel construction.…

view full answer...

Answer 4

Shane, sorry to say we don't have a replacement hardware kit by itself for the B&W Turnoverball #BWGNRK1313. The hardware actually does not look like it's offered by B&W themselves, unfortunately. What I did instead is attach a…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 10

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…

view full answer...

Replacement Adjustment Pin and Lock Sets For B&W Tow and Stow 3-Ball Hitch System

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching