Can Rola Dart Trailer Hitch Mount Cargo Carrier be Locked to the Trailer Hitch

Question

Question:

i just purchased a rola dart cargo carrier for my 2013 honda pilot, would this hitch lock be compatible with the rola?

asked by: Mark S

1

Helpful Expert Reply:

The Rola Dart has a threaded hitch pin meaning that it has a weld nut inside the shank. That nut is going to prevent the use of lock # 63232. The best way to lock the carrier to the hitch is to use a cable lock such as # TR63255.

expert reply by: Michael H

1

Answer 1

Yes, the oval lights included in the Rola LED Light Kit for Railed Cargo Carriers 59516 will fit into light mounting bracket #BK70BB using the grommets include with the light kit. If you need replacement grommets you can use part #A70GB. As an…

view full answer...

Answer 2

We do have options however the Rola Dart cargo carrier is discontinued. The carrier used a specific threaded hitch bolt which is no longer available. We confirmed with Rola that the threading of the pin can be either 7/16 inch-14 or 5/8 inch-11. You…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Can Rola Dart Trailer Hitch Mount Cargo Carrier be Locked to the Trailer Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching