Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This 3/4" round light uses two white LEDs that shine bright while drawing just 0.03 amps at 12.8 volts. Compared to older incandescent lights, these LEDs last up to 50 times longer and run cooler with less power draw. That means clear, even illumination on your license plate without putting extra load on your wiring or battery.
Water is no match for this light. The circuit board and housing are completely sealed, keeping moisture out so the diodes stay protected and reliable. Whether you’re driving through rain or dunking a trailer at the ramp, this waterproof design won’t short out or fog up, making it perfect for trailers that see harsh conditions.
Installation is straightforward with the built-in pigtail that’s ready to plug into your existing wiring. The two-wire setup keeps things simple—just connect power and ground using the 0.108" male barrel connectors. No extra adapters or complicated rewiring needed, so you can get it mounted and lit in minutes.
Space is often limited near a trailer’s license plate area, and this compact design fits right in without getting in the way. At only 3/4" in diameter, it mounts neatly using a required bracket (sold separately) and gives a clean, professional look once installed. Even small trailers can benefit from bright, compliant lighting without bulky housings sticking out.
Good visibility isn’t just convenience—it’s required for safety. When properly mounted with the bracket, this light meets SAE J587 requirements and is fully DOT compliant. That means dependable performance that meets recognized standards every time you tow.

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a look at this submersible LED trailer license plate light. Now, this three quarter-inch diameter round waterproof trailer light illuminates your license plate when mounted with the required bracket. And I do have this connected to 12-volt power, and lemme just give you a brief demonstration of what this looks like lit up. The LEDs, of course, make great replacement for incandescent lights. They last 50 times longer and they're more efficient and they provide brighter light with less power output.
So, there's no bulbs to replace and no brittle filaments. And again, you can see this nice, bright, white light that it casts. And this is with my studio lights off and even with my studio lights on, you can see it real well and see just how bright it is. The two white LEDs are behind a clear polycarbonate lens and sealed in a waterproof construction that's submersible. And this is a two-wire pigtail with 0.108 male barrels, as you see here.
And again, this is DOT compliant. And again, the diameter is three quarters of an inch. The power draw at 12.8 volts is gonna be 0.03 amps. And there is a lifetime warranty on the LEDs. Well, that's gonna conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Ratings & Reviews

Bill
7/4/2023
The light is still in place and working, no complaints. And this after many miles on and off road.

Pat M.
6/8/2021
A year later and still working exactly as it should. I would gladly buy this product again.

Gwendolyn Y.
4/23/2026
The lights look great on your truck, Nathan!

John
4/3/2022
Still working great, nice and bright.

James
11/4/2019
Works perfectly: no problems.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





James D.
7/24/2026
Thanks for the review Doug, Glad to hear these were a perfect replacement for the incandescent license plate lights. I like the idea of painting one side to match the original lights and I agree, by the lights being sealed they should last a lot longer. Thanks for stopping by and we appreciate you choosing etrailer!