45 Amp Converter Upgrade For LiFePO4 Lithium Batteries to Replace Parallax Model 7345

Question

Question:

I need to purchase a converter for my 2003 BT Cruiser. I recently switch from lead acid battery to FeP04 Lithium. My old converter/charger is not working. It is a Parallax Model 7345, Series 7300. 45 Amp 775 Watts. 12VDC. Do you have a replacement for that? Thanks for your help.

asked by: David S

0

Expert Reply:

We do indeed have a 45 amp converter that is designed to work with your LiFePO4 lithium batteries and replace your Parallax Model 7345. What you need is the following:

- Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 45 Amp # PD4645V

expert reply by: Kyle S

0

Answer 1

Hey David, The correct fitting replacement converter cross-section for your MagneTek 6345A would be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V. This converter section is now compatible with flooded lead…

view full answer...

Answer 2

Yes, the Progressive Dynamics Replacement Section #PD4645V is compatible with LiFePO4 lithium batteries.

view full answer...

Answer 3

To replace the charger/converter on your Magnetek 6345 you need the 45 Amp Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel #PD4645V as well as a jumper change to the Li position that you can get from Progressive Dynamics…

view full answer...

Answer 4

Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is what you need as a replacement lithium compatible converter for your 6345 Parallax model.

view full answer...

Answer 5

Yes, the Progressive Dynamics Converter #PD4645V can be switched to a lithium profile. This is a recent update for this converter which is why there is some outdated info out there on it. A jumper is basically just a small switch on the circuit…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

45 Amp Converter Upgrade For LiFePO4 Lithium Batteries to Replace Parallax Model 7345

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching