Replacement Center Cap Plug for Trailer Wheel Lionshead

Question

Question:

Need just the Snap-in Plug for Stainless Steel Center Cap for: 17.5X6.75 Lynx Silver Aluminum Wheel 9/16 lug DO NOT need Center Cap just plug

asked by: William B

0

Expert Reply:

Sounds like you are looking for a center cap plug like the part # AM90082 William. I don't know exactly what size you need since you didn't mention that but this plug is typically used on wheels your side and has an outer diameter of 2-1/16 inches. If you need a different size let me know and I'll see what we have that might match.

Another option though is the part # LHSI60C which has an outer diameter of 2-1/4 inches.

expert reply by: Jameson C

0

Answer 1

The correct center cap plug you need is the part #LHSI60C which fits the 2 inch hole your current center cap has.

view full answer...

Answer 2

Hello Brook, thanks for reaching out. Generally, when we see this issue with the Furrion RV Refrigerator w/ Freezer #FCR14ACBQABL it is because the unit is not getting enough power. If it is not getting enough power, the freezer and lights may work,…

view full answer...

Answer 3

The Aluminum Liger Trailer Wheel #LH39FR has a 4.88" pilot diameter. This means the correct cap is the Lionshead Trailer Wheel Center Cap #LHCS109-SI60C.

view full answer...

Answer 4

Hey Daniel, thanks for reaching out! The 16" Lionshead Lynx trailer wheel was discontinued back in 2021 and isn't available anymore so I recommend going with the Aluminum Sendel Series T02 Machined Trailer Wheel #AM22662 instead since it has…

view full answer...

Answer 5

We do have a snap in plug for Lionshead trailer wheel center caps. The Snap-In Plug for Lionshead Trailer Wheel Center Caps - Chrome #LHSI60C will fit the following three models. #LHCS102, #LHCS108, #LHCS109. If you have one of these models then this…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Center Cap Plug for Trailer Wheel Lionshead

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching